Centro 6800 warranty Hardware Pack, Description Part Number Quantity

HARDWARE PACK

TOOLS NEEDED FOR ASSEMBLY	No.	Description	Part Number	Quantity
• #2 Phillips screwdriver (long and short)	1	1/4"×38mm Screw	20120-13038-250	4
	2	1/4"×16mm Screw	20120-13016-250	8
• ¼” Slotted screwdriver (long and short)
	3	1/4"×13mm Screw	20120-13013-250	14
• Adjustable wrench
	4	ø7 Lock Washer	41400-07000-250	26
• Pliers
	5	ø7 Washer	40300-07000-250	26
• Rubber Mallot	6	NO.10×10 Screw	20124-10010-250	28
Before assembling the barbecue, read these	7	ø5 Lock Washer	41400-05000-250	28
instructions carefully.	8	ø5 Washer	40300-05000-250	28
Assemble the barbecue on a flat, clean surface.	9	NO.10 Nut	30224-10000-250	4
Grill is heavy.	10	ST4.2×20 Tapping Screw	22500-42018-250	1
Notes: Do not fully tighten all the nuts during this
	11	ST4.2×10 Tapping Screw	22500-42010-137	1
initial stage.
	12	NO.8-32UNC x10 Screw	20332-08010-250	4
	13	Control Knob	G412-4500-9000	1
	14	Wrench	G401-0071-0182	1

Caution:

Sheet metal can cause injury. Wear gloves when installing the grill.

#1. ¼”×38mm Screw (x4) #2. ¼”×16mm Screw (x8) #3. ¼”×13mm Screw (x14)

#4. ø7 Lock Washer (x26) #5. ø7 Washer (x26) #6. NO.10×10 Screw (x28)

#7. ø5 Lock Washer (x28) #8. ø5 Washer (x28) #9. NO.10 Nut (x4)

#10. ST4.2×20 Tapping Screw (x1) #11. ST4.2×10 Tapping Screw (x1) #12. NO.8-32UNC x10 Screw (x4)

#13. Control Knob (x1) #14. Wrench (x1)

1