Pressure Regulating, Rating Plate

Installing The Tandoor

PRESSURE REGULATING

The Tandoor and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at pressures in excess of 1/2 psig.

The Tandoor must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping at pressures equal or less than 1/2 psig.

Tandoor must have a pressure regulator on the incoming service line for safe and efficient operations. Regulators installed must be listed by a nationally recognized testing agency. Line service pressure may fluctuate with local demand. If the incoming pressure is in excess of 1/2 psig. A step down regulator will be required. Minimum

incoming pressure must be 7” W.C. for natural and 11” W.C. for propane.

Manifold pressure should be checked with a manometer. Natural gas units require 6” W.C. and propane units require 1o” W.C. Double check the arrow forged into the bottom of the regulator body which shows gas flow direction. It should point downstream towards the appliance. The air vent cap is also part of the regulator and should not be removed. The pressure regulator installed must be listed by a nationally recognized testing agency. If the vent line from the gas appliance regulator is used, it should be installed to the outdoors in accordance with local codes or in the absence of local codes, with the National Fuel Gas Code, ANSI z223.1-1988.

Regulators can be adjusted in the field, but it is not recommended that they be tampered with unless the part is known to be out of adjustment or serious pressure fluctuations are found to exist and can be solved no other way. Any adjustment to regulators must be made by qualified service personnel with the proper test equipment.

RATING PLATE

The Tandoor can be connected to either natural or propane gas, depending on the customers ordering instruc- tions. Be sure the unit gas type matches the supply gas type. Gas type will be located on the rating plate.

The rating plate is attached to the inside of the lower front panel. Information on this plate includes the model and serial numbers. This data is essential for proper identification when communicating with the factory about a unit or requesting special parts or information. Other information on this plate is the BTU/HR input of the burners, outlet gas pressure in inches W.C., and whether the unit is orificed for natural or propane gas.

The Tandoor can be connected to either natural or propane gas, depending on the customers ordering. Be sure the unit gas type matches the supply gas type. The Tandoor is field convertible between natural and propane gas. Contact customer service at (888) 281-5698 for conversion kit and conversion instructions.

Caution: All connections must be sealed with a joint compound suitable for L.P. gas, and all connec-

tions must be tested with a soapy solution before lighting any pilots. DO NOT use an open flame to check for leaks. Putting an open flame beside a new connection is not only dangerous, but will often miss small leaks that a soapy solution would find.

FLEXIBLE COUPLING, CONNECTORS, & CASTERS

If the unit is to be installed with flexible coupling and / or quick disconnect fittings, the installer must use a heavy duty, commercial flexible connector at least 3/4” NPT (with suitable strain relief) in compliance with the standard for connectors for movable gas appliances, ANSI Z21.69-1987 and Addenda, Z2.169a-1989 (or latest edition) or connec- tors for movable appliances, CAN/CGA-6.16 (or latest edition) and a quick disconnect device must comply with the stan- dard for quick disconnect devices for use with gas fuel, ANSI Z21.41-1989 (or latest edition) or quick disconnect devices for use with gas fuel, CAN1-6.9 (or latest edition).

CGT specifications

DCS CGT, or Digital Combat Simulator Combined Arms Ground Team, represents a significant advancement in military simulation technology and training. This cutting-edge platform is designed to provide realistic and immersive environments for training ground forces, allowing users to experience various combat scenarios with an unparalleled level of detail and authenticity.

One of the main features of DCS CGT is its high-fidelity graphics engine, which offers stunning visuals that accurately depict a variety of terrains and landscapes. From arid deserts to urban environments, the simulation incorporates realistic terrain modeling, weather effects, and dynamic lighting conditions. This enables users to train in environments that closely resemble real-world combat zones, enhancing preparedness and situational awareness.

DCS CGT's technology stack includes advanced physics modeling and AI-driven opponents, making enemy interactions more compelling and life-like. Soldiers in training can expect to encounter smart AI that reacts to player actions, providing an unpredictable adversarial dynamic. This not only boosts the training experience but also encourages more strategic thinking and adaptability among participants.

Human-computer interaction is enhanced through the use of versatile control systems. Users can engage in ground combat using a variety of vehicles and equipment, from armored personnel carriers to tanks. The simulation allows for detailed vehicle handling, weapon systems integration, and communication protocols, ensuring operators gain first-hand experience working with modern military technologies.

DCS CGT also features multiplayer capabilities, enabling users to collaborate or compete against one another in large-scale operations. This aspect fosters teamwork and communication, essential skills for effective ground operations. Additionally, mission customization tools allow trainers to design scenarios tailored to specific objectives or tactical lessons, providing flexibility in training programs.

Another characteristic of DCS CGT is its integration with other DCS modules, allowing joint warfare training scenarios alongside air and naval units. This integration provides a coalesced view of modern warfare environments, where ground forces must work alongside air support and naval assets for mission success.

In conclusion, DCS CGT is a comprehensive training tool that leverages advanced technologies to create a realistic, immersive, and adaptable combat simulation. With high-fidelity graphics, intelligent AI, versatile control systems, and a focus on teamwork, it equips military personnel with the skills and experience necessary for success in today’s complex battlefields.