Grill Assembly

IMPORTANT: Remove all protective plastic film from stainless steel parts and any packing materials from grill prior to assembly/use. This film or packing materials are installed at the factory to prevent damage that could occur during shipment and handling.

1.With lid latched, lift up on handle and set grill so it is resting on the back of the case. (Fig. 1)

Note: Use a drop cloth to help protect the stainless steel finish.

2.Align bolts on leg with holes on bottom of grill and hand tighten knobs clockwise to secure. (Fig. 2)

3.Install other leg as shown. (Fig. 3)

4.Set grill upright on legs, open latch and lift lid up. (Fig. 4)

5.Install crumb tray in center front of grill. (Fig. 5)

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5