Grill Assembly — 8200 Series
Side Burner Installation (continued)
5.With a Phillips head screwdriver, remove both mounting screws from the front of the valve assembly (Fig. 17).
6.From underneath the side shelf, slide the valve stem through the hole in the front of the shelf (Fig. 18).
7.Insert two mounting screws through the bezel and into the side burner valve and tighten. Make sure the bezel is installed correctly with the “OFF” designation at the top (Fig. 19).
8.Press the side burner assembly into the side burner tray and install two self tapping screws (Fig. 20).
9.Remove the igniter button and plastic hex nut from the electrode module (Fig. 21).
12
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21