SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION | |
V | Volts | Voltage | |
A | Amperes | Current | |
Hz | Hertz | Frequency (cycles per second) | |
min | Minutes | Time | |
| Alternating Current | Type or a characteristic of current | |
Direct Current | Type or a characteristic of current | ||
n0 | No Load Speed | Rotational speed, at no load | |
.../min | Revolutions or Reciprocation Per Minute | Revolutions, strokes, | |
surface speed, orbits etc. per minute | |||
|
| ||
|
| Indicates danger, warning or caution. | |
| Safety Alert Symbol | It means attention!!! Your safety is | |
|
| involved. | |
|
| Always wear safety goggles or | |
| Wear Eye Protection | safety glasses with side shields when | |
|
| operating this product. | |
| Wet Conditions Alert | Do not expose to rain or use in damp | |
| locations. | ||
|
|
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
Symbol Meaning
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
6