Broilmaster P4-1, P3-1 owner manual Gas Conversion, Mueller

Page 17

Gas Conversion

Gas Conversion

Propane grills include a conversion kit for natural gas. If you have a natural grill and wish to convert it to propane you will need to purchase the optional conversion kit #BCK195.

Begin by removing all the components from the inside of your grill. Locate and remove the orifice hoods mounted on the underside of the grill body, using 2 wrenches as shown. Figure 13.

Figure 13

HOSE AND REGULATOR

ORIFICE HOOD

SUPPLY TUBE

Before installing the natural hoods, inspect them for damage and note the number stamped on the side. The correct hood will be marked "48".

The hoods are self-sealing, requiring no additional pipe sealant. If you wish to use sealant, take care to add it to the threads only to avoid blocking the orifice.

Thread the hoods onto the supply tubes leaving about a 1/8" gap between the hood and the locking nut. Figure 14.

Remove the hose and regulator from the valve.

Replace the components inside of your grill.

Mueller

Remove the knobs from the valve assembly and locate the adjustment screws on the inside of the valve stem. Using a small screw driver, turn the screws clockwise until screw bottoms, then turn the screws four (4) FULL turns counterclockwise. Do not back the screws out more than 4 1/2 turns or a leak may result. Figure 15.

Connect the grill to the natural gas supply.

Important: Before lighting your grill, check the gas connections and the adjustment screws for leaks using a soapy water solution.

Caution: Never use this or any gas appliance which may be leaking gas.

Replace the knobs.

Figure 15

CONTROL PANEL

LEFTRIGHT

OFF

OFF

HI

HI

3

3

2

2

1 LO

1 LO

VALVE STEM

ADJUSTMENT SCREW

Figure 14

1/8"

48

ORIFICE

HOOD

NUT

SUPPLY

TUBE

WRENCH

Place the completed conversion label adjacent to the product identification label, located on the control panel (26).

NOTE: When converting your grill to Natural gas and your incoming gas pressure is below 7", a DPA105 regulator kit can be purchased.

B100911-3-0806

Page 17

Image 17
Contents B100911-3-0806 Premium P Gas GrillIf YOU Smell GAS Congratulations Table of Contents Hardware Package Parts Diagram Premium P Series Parts List P4FBL-1 P4FGY-1 P4BLN-1 P4HGN-1 P4GYN-1 P4FBLN-1 P4FGYN-1 Grill Mountings Grill AssemblyBefore You Begin Recommended Tools Installing the Ignitor Ignitor AssemblyRadiation Shield Installing the BurnerLid Stop HandleInstalling Char-Master Briquets Installing RacksCylinder Requirements Propane GAS GrillsGrill Location Cylinder Storage Propane Cylinder Safety Connection RequirementsConnecting to Propane Gas Pressure Regulator and Hose AssemblyMueller Gas ConversionGas Valve Grill Location Gas Type Natural GAS GrillsOperating Instructions Air Shutter AdjustmentChecking for Gas Leaks Before Cooking OperationPreheating CookingMaintenance Problem Cause Solution TroubleshootingWarranty Terms B100911-3-0806 B100911-3-0806 B100911-3-0806 Broilmaster

P3-1, P4-1 specifications

The Broilmaster P4-1 and P3-1 are standout models from the Broilmaster lineup, designed to bring convenience, performance, and durability to outdoor cooking enthusiasts.

The Broilmaster P4-1 is well-known for its versatility and robust construction. At the heart of the P4-1 is a powerful 40,000 BTU stainless steel burner, ensuring high heat output for searing meats or grilling vegetables to perfection. One of its leading features is the cooking grid design, which combines individual cast iron cooking grids with a chrome coating. This ensures even heat distribution while providing a non-stick surface for easy food release.

The P4-1 also incorporates a premium stainless steel emitter system that optimizes heat distribution across the grilling surface. This technology enables consistent cooking temperatures, minimizing hot spots and ensuring that every item on the grill receives the right amount of heat. Additionally, with its dual level cooking feature, the P4-1 provides the flexibility to cook different items at separate temperatures simultaneously.

On the other hand, the Broilmaster P3-1 is a more compact option tailored for smaller spaces without sacrificing performance. This model also features a 40,000 BTU stainless steel burner, ideal for achieving high temperatures quickly. The standout feature of the P3-1 is its integrated ignition system, enabling easy start-ups with just a push of a button.

Both the P4-1 and P3-1 are designed to endure the rigors of outdoor use. Constructed from heavy-duty stainless steel, they claim longevity and resistance to rust and corrosion. The grills come equipped with an infinity control valve system that allows precise temperature management, giving users complete control over their cooking environment.

Moreover, the P4-1 and P3-1 models boast ample cooking space, accommodating large gatherings. Their sleek designs are complemented by optional side shelves that provide additional workspace for food preparation. For grilling enthusiasts who value efficiency and performance, both models support quick and easy cleanup thanks to their removable grease trays.

In conclusion, the Broilmaster P4-1 and P3-1 promise an engaging grilling experience, combining advanced technologies and robust characteristics that cater to the needs of both novice and seasoned grillers alike. With their outstanding heat management and durable construction, these grills represent a reliable choice for any outdoor cooking setup.