Built-In Kit Location

Location, Connections, and Safety

Built-In Kits are designed for outdoor use ONLY.

This Built-In Kit is designed for use with all P3 and T3 Model Broilmaster® gas grills and cannot be used with any other grill or in any other capacity.

Never install or operate your Built-In Kit in any building, garage, or other enclosed area.

For your safety, the Built-In Kit should not be installed or operated under any combustible materials, such as carports, covered porches, awnings, or overhangs.

Never install or use your Built-In Kit in or on any recreational vehicle or boat.

CAUTION: THE INSTALLATION AND OPERATION OF THIS BUILT-IN KIT AT CLEARANCES LESS THAN SPECIFIED BELOW MAY LEAD TO THE POSSIBILITY OF FIRE, PROPERTY DAMAGE, OR PERSONAL INJURY.

A minimum clearance of twenty-four (24”) inches is required from all sides of the island to any combustible material.

Examples of combustible materials are patio furniture, fences, or the outside of your home.

The area surrounding the built-in kit should be clear to ensure proper ventilation. Do not obstruct the flow of combustion and ventilation air in any way. The ventilation openings on the enclosure must also remain free and clear of debris.

WARNING: DO NOT INSTALL OR OPERATE THIS BUILT- IN KIT WHERE GASOLINE OR OTHER FLAMMABLE MATERIALS ARE USED OR STORED. FAILURE TO COMPLY WITH THIS WARNING COULD RESULT IN EXPLOSION OR FIRE CAUSING PROPERTY DAMAGE OR PERSONAL INJURY.

CAUTION: THE GRILL AND ITS INDIVIDUAL SHUTOFF VALVE MUST BE DISCONNECTED FROM THE GAS SUPPLY PIPING SYSTEM DURING ANY SYSTEM PRESSURE TESTING AT TEST PRESSURES IN EXCESS OF 1/2 PSIG.

Checking for Gas Leaks

CAUTION: DO NOT USE AN OPEN FLAME TO CHECK FOR LEAKS. CHECKING FOR LEAKS WITH AN OPEN FLAME MAY LEAD TO A FIRE OR EXPLOSION, RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.

Using the following steps, check for gas leaks during initial use and each time your Broilmaster® gas grill or side burner is connected to gas or is connected to a cylinder that has not been used recently

1.Using dish washing detergent and water, make a soapy solution.

2.Turn OFF the knob on both the grill and side burner’s control panel.

3.Turn ON the gas at the supply. A hissing sound indicates a leak. Turn OFF the gas and repair all leaks.

4.If no hissing occurs, apply the soapy solution to all gas connections.

5.Look for bubbles. Bubbles indicate a leak.

6.If there are bubbles, turn OFF the gas and repair all leaks.

7.Turn the gas ON and repeat the above procedure until all leaks are repaired.

Connection Requirements

CAUTION: NEVER USE LIQUID PROPANE GAS IN A GRILL DESIGNED FOR NATURAL GAS, OR NATURAL GAS IN A GRILL DESIGNED FOR LIQUID PROPANE GAS. QUESTIONS REGARDING DIFFERENT TYPES OF GASES SHOULD BE DIRECTED TO YOUR LOCAL GAS COMPANY.

Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada, installation shall be in accordance with CAN/CGA-B149.2 Propane Installation Code, or CAN/ CGA-B149.1 Natural Gas Installation Code, and local codes where applicable. Consult your local gas company or Propane gas dealer for code regulations and recommended procedures.

Broilmaster® gas grills and side burners are NOT equipped with pressure regulators. Your Nat. gas grill operates at a manifold pressure of seven (7”) inches water column.

Page 4

B101502-3-1012

BHAX-1, BSA-1, BBA-1, BDA-1, BRB-1 specifications

Broilmaster has long been synonymous with high-quality outdoor cooking solutions, and their lineup of gas grills including the BRB-1, BDA-1, BHA-1, BBA-1, and BSA-1 models showcases this reputation. Each of these grills is designed to bring the backyard cooking experience to new heights, equipped with features and technologies that meet the demands of grill enthusiasts.

The BRB-1 is a robust and versatile grill that offers exceptional durability due to its use of premium materials. One of its standout features is the stainless steel burners, which deliver consistent, high heat for optimal cooking. The BRB-1 also incorporates a unique cooking system, allowing for even heat distribution, reducing cold spots and increasing the efficiency of cooking. Additionally, this model features a convenient side shelf, providing ample workspace for food preparation.

The BDA-1 model is characterized by its innovative dual cooking system. This grill allows users to cook different foods at various temperatures simultaneously, making it perfect for entertaining. The BDA-1 also includes an easy-to-clean grease management system, which simplifies maintenance and enhances food safety by reducing flare-ups.

The BHA-1 is ideal for those who value both functionality and aesthetic appeal. Featuring a sleek design, this grill includes a built-in thermometer for precise temperature control during cooking. The BHA-1 leverages infrared cooking technology, which seals in juices and flavors while providing high heat for searing meats perfectly. This model also boasts a spacious cooking surface, accommodating larger meals, making it suitable for family gatherings.

The BBA-1 offers further versatility with multiple cooking options, including grilling, smoking, and roasting. This grill is equipped with an automatic ignition system that ensures easy startup every time. The BBA-1 also supports a range of accessories, allowing users to customize their grilling experience according to personal preferences.

Finally, the BSA-1 stands out with its efficiency and user-friendly features. Designed for easy assembly and maintenance, this model includes tool hooks and an integrated storage cabinet to keep grilling essentials organized. The BSA-1 integrates high-grade materials that withstand the elements while providing stylish outdoor decor.

In summary, Broilmaster’s BRB-1, BDA-1, BHA-1, BBA-1, and BSA-1 models each offer unique features tailored to different grilling styles and preferences. From durability and temperature control to versatile cooking systems, these grills aim to elevate the outdoor cooking experience for enthusiasts of all levels.