3Com 65.7cs, 50.7cs manual Installation, Intermount III Mounting Rings, Flush-Mount, Surface-Mount

Page 3

INSTALLATION

INTERMOUNT III MOUNTING RINGS

The Kappa 60.7cs is packaged with two different speaker adaptor rings. The rings will allow the speakers to be installed into various factory 6,"

6-1/2" and 6-3/4" openings. The metal ring can be mounted in many European vehicles, Japanese vehicles or vehicles with 6" speaker locations. The plastic ring can be mounted in many vehicles using 6-3/4" speaker locations or three-point mounting frames.

Figure 3. Mounting the 65.7cs in a 165mm speaker location using the supplied metal ring.

FLUSH-MOUNT

Figure 5A. Mounting the tweeter using the I-Mount™ flush-mounting kit.

3

1 2

SURFACE-MOUNT

Figure 5B. Mounting the tweeter using the I-Mount surface-mounting cup.

TWEETER ANGLE

Figure 6. Aim the tweeter at the listening position by sliding the stud in the groove on the back of the tweeter cup and rotating the entire assembly in the mounting surface. Lock the tweeter in place, using the small retaining screw.

3

ROTATE ENTIRE ASSEMBLY

TO AIM ANGLED TWEETER

TOWARD LISTENER.

1

SLIDE SCREW UP OR

DOWN TO ADJUST

TWEETER ANGLE.

2

TIGHTEN SCREW TO

LOCK ANGLE SETTINGS.

4

Figure 7A. Behind grille panel.

Figure 7B. Mounted to surface behind grille panel.

FOAM GASKET

MOUNTING RING

Figure 4. Mounting the 60.7cs woofer in a standard speaker location.

1

ATTACH BASE

WITH SCREWS,THEN:

2

3

BLACK (—)

RED (+)

SECURELY TIGHTEN

THE LARGE HAND NUT.

Figures 7A through 7D. The Starfish™ tweeter mount is intended to be used when the tweeter will be installed behind a factory grille (e.g., replacing the factory tweeter behind a door panel). The Starfish will allow you to mount the component tweeter directly to the panel itself or to the area behind the panel. The six mounting tabs can be removed easily to create a number of custom configurations.

Note: Check screw clearance before installing. Use glue if clearance is an issue.

Note: Not all possible mounting configurations are shown.

Figure 7C. Mounted to grille panel.

Figure 7D. In-dash location (may require gluing).

FOAM GASKET

kappa series

 

Image 3
Contents Kappa series Installation Warnings and Tips SURFACE-MOUNT InstallationIntermount III Mounting Rings FLUSH-MOUNTConnections Installation SpecificationsTweeter Level Adjustment Mounting the Crossover

680.7cs, 65.7cs, 60.7cs, 50.7cs specifications

The 3Com series of networking devices, specifically the 60.7cs, 50.7cs, 65.7cs, and 680.7cs, represent a significant advancement in network technology, catering to various organizational needs. Each model boasts unique features that enhance connectivity, security, and overall performance, making them suitable for diverse business environments.

The 3Com 60.7cs is designed for small to medium-sized businesses looking for reliable connectivity. Its main features include support for both wired and wireless connections, ensuring flexible network options. The device supports advanced security protocols, including WPA2 enterprise, which bolsters protection against unauthorized access. Additionally, the 60.7cs is equipped with advanced Quality of Service (QoS) settings that prioritize critical business applications, ensuring seamless communication and data transfer.

Moving on to the 50.7cs, this model caters to slightly larger environments needing enhanced performance. It introduces dual-band capabilities, allowing simultaneous operation on both 2.4GHz and 5GHz frequencies. This dual-band capability improves network capacity and minimizes interference, leading to improved overall throughput. The 50.7cs also incorporates robust traffic management features, including VLAN support, optimizing network segmentation for better performance and security.

The 65.7cs takes networking a step further by integrating advanced features suitable for growing businesses. This model supports Power over Ethernet (PoE), which simplifies network wiring by allowing power and data to be transmitted over a single cable. The 65.7cs is also designed for enhanced scaling, enabling businesses to expand their network effortlessly without compromising on performance. Advanced monitoring tools integrated into the device provide real-time analytics, helping network administrators manage resources effectively.

Finally, the 680.7cs stands out as a top-tier solution for enterprises requiring comprehensive networking capabilities. This model features a robust architecture designed to handle high traffic loads while maintaining low latency. With enhanced security features, including firewall functionality and intrusion detection systems, the 680.7cs safeguards sensitive data. The device supports advanced routing protocols to ensure optimal data flow across extensive networks. Its configurability allows IT teams to customize settings according to specific organizational needs.

In summary, the 3Com 60.7cs, 50.7cs, 65.7cs, and 680.7cs are well-engineered networking devices that cater to various business requirements, combining advanced features and technologies to deliver exceptional performance, security, and scalability. These devices demonstrate 3Com’s commitment to providing innovative solutions for the evolving landscape of network connectivity.