Thermos 06401314 manual Assembly

Page 10

ASSEMBLY

	1	1) Lay bottom casting assembly upright on level ground. Best to place on top of protective
	1	mat or cardboard to reduce scratching.
		mat or cardboard to reduce scratching.

#10 x 3” Screw Qty: 4

2)Insert each leg assembly onto bottom casting assembly. Assure cutouts on leg pivot engages over threaded tabs on bottom casting assembly.

3)Attach each leg assembly using (2) #10-24x3” screws.

	Leg	Threaded Tabs
	Assemblies	Threaded Tabs
	Assemblies

#10-24x3” Screws

Bottom Casting

Assembly

1)	Open legs and set grill upright standing on legs. Note: Legs
2	will lock into slot on side handles.
	will lock into slot on side handles.
2)	Secure (4) caps over legs locking area.

Side Handle

Slots

10 • 06401314

Image 10

Contents Assembly, Operation, Use and Care ModelSafety Symbols Call Grill Service Center for Help and PartsTable of Contents Apartment Dwellers Leak Testing 1 lb. Disposable ImportantFor Safe Use of Your Grill and to Avoid Serious Injury LP Liquefied Petroleum GasIgnitor Lighting Safety TipsTurn controls OFF and disconnect cylinder when not Before Your First CookoutImmediately turn off gas at LP cylinder Cleaning The Burner AssemblyGeneral Grill Cleaning Wait for grill to coolStoring Your Grill Food SafetyHow To Tell If Meat Is Grilled Thoroughly Non-Stick Cooking Surface Use and CareParts List Parts Diagram Assembly Handle #10-24 x 3/8 Screw Qty Grill Lid Handle light in place 06401314 Close grill lid Storing & Transporting Emergencies Troubleshooting Rotary IgnitionLimited Warranty Please register your grill online at Grilling Safety Checklist Thank You for Your Purchase