USING YOUR GREAT BIG GRILL
BEFORE FIRST USE
?Make sure the voltage in your outlet is the same as the voltage indicated on the appliance. This appliance is for 120
?Remove any bags, labels or stickers from the appliance.
?Make sure the appliance is unplugged, and then clean the base unit with a damp soft cloth. Wipe the cool grilling plates with a damp cloth to remove any dust. Dry thoroughly. Do not use metal scouring pads, harsh or abrasive cleaners on any part of the appliance.
?Wash the drip tray using a sponge, warm water and mild dish detergent, or on the top rack of a dishwasher. Rinse and dry completely.
?NOTE: do not immerse the appliance, cord or plug in water when cleaning.
?Place the unit on a flat, dry, sturdy surface. This appliance is not for use in convection or conventional ovens, microwaves, or on a stovetop.
?Wash and dry all components thoroughly as stated above.
?Plug the cord into AC wall outlet.
?Before cooking, ensure that your drip tray is in position under the lower housing to allow grease to drain into the drip tray.
?When you have finished using your Great Big Grill, disconnect the plug from the wall to turn the unit off, and allow the unit to cool down completely before cleaning.
?We recommend a trial run to eliminate any protective substance or oil that may have been used for packing. Run the Great Big Grill for 15 minutes empty. You may notice some smoking coming from the appliance and a slight odor or noise during this trial run. This is normal and will not affect the food or safe operation of the grill. Let the grill plates cool and wipe them clean. It is now ready to use.
HOW TO USE YOUR GREAT BIG GRILL
Always ensure food is cooked completely throughout its thickness. Frozen food must be completely defrosted and at
room temperature before cooking.
?Check to make sure the drip tray is in position
?Place the Great Big Grill on a dry, stable surface away from open flame or hot burners. This appliance requires 1400 watts and should be the only appliance operating on the circuit. Plug the grill into a 120 volt outlet only.
?Preheat the grill. Your grill will not properly preheat unless it is closed. Check first to be sure nothing is inside the grill before preheating. Preheating before each use will ensure even cooking of your food.
?When you plug the unit into the socket, the indicator light will turn on, indicating that the heating elements are warming up.
?The indicator light will turn off in approximately 5 minutes. The grill is now ready for cooking. The indicator light will go on and off periodically as the operating temperature is maintained.
?A thin coating of cooking oil applied by brush or spray may be used for grilling lean meats, vegetables or fish. Grilling marinated food or meat with any amount of fat will not require oil.
?When the grill is preheated, carefully lift the lid to open, place the food on the bottom surface of the grill and close the lid.
?Allow the food to cook for the minimum time indicated on the Grilling Chart. Check for doneness. If not done grilling to your desired result, continue cooking. Periodically check the progress of cooking until it is done to your satisfaction.
?When the food is completely cooked, turn the grill off by disconnecting the plug from the socket.
?Allow the appliance to cool before moving, removing the drip tray and before cleaning.
5