Philips LED Luminaires LedMaster LedString, Product dimensions Controller, Main applications

LedMaster 800

LedString

	The Philips LedString system is formed by L E D	• Ingress protection: IP 66 (EN 60598, EN 60529)
	modules, connected by wires and designed to be	• Approval marks: ENEC , CE , cCSA us.
	directly mounted onto a sign back-plate or other	• Quality standard: ISO 9001-2000
	substrate.The driver is a single device which	• Environmental standard: ISO 4001
	converts the main voltage to a low voltage D C
BEAUTIFICATION	required to operate LedString.	Benefits
		• Reliable and flexible
	Features	• Low cost of ownership
	• Available in 21mm reels of L E D s, with a slim	• Long life
CITY	driver: both fully weather proof	• Safe to use: no high voltages or toxic materials
	• Each driver has a minimum connection of 5 L E D s	• Easy to install
LUMINAIRES
	(Red and Amber) or 7 L E D s (Blue and Green).	• No breakage during shipping and handling
	Maximum connection is 45 L E D s or
LED	49 L E D s respectively	Main applications
	• Standard range: Red,Amber, Blue, Green and White	• Outdoor signage
10	• Safety compliance: EN 60598	• Decorative lighting

Product dimensions

Controller

The LedMaster 800 is a compact and powerful controller in the Philips LED range of color changing luminaires. LedMaster 800 possesses tremendous controlling power to command up to 720 units of the LED color changing luminaires.

Features

•Extremely diverse color changing effects – up to 32 sequencing effects in descriptive language with minimum memory storage

•Connects up to 8 sub-controllers for a maximum of 720 units of true-color LED luminaires

•Built-in 64K non-volatile memory to store up to 32 sets of programs

•Equipped with 5 sets of DIP switches that allows manual settings of 32 pre-set programs

•RS -232port – serves as an interface between LedMaster 800 and PC software; or as a gateway to other control systems

Main applications

•Façade

•Landscapes

Power Supply

The LedMaster 800 Power Supply is an integrated device panel and serves as a power source for the Philips LED range of color changing luminaires. It also serves as the data repeater hub of

its controller.

Features

•Optimizes power supply for R, G, B diodes of the LED luminaires thereby providing constant power for dynamic color changing ranges of each color

•An embedded data repeater allows LED luminaires to be installed over long distances. This is especially beneficial to motion-picture- like programming

•With 7 power output ports, the system can support up to 7 circuits of LED luminaires with a maximum power limit of 100W x 3

LED LUMINAIRES CITY BEAUTIFICATION

11

Product dimensions

LED module

Connector

Driver

Pitch=7mm

Controller

			194
		101
			286
			Program Selection
101	96	CONSOLE					POWER
		4.T	3.T	2.T	1.T	0.T	ON
							OFF
		POWER	ACTIVE		FAIL		TEST

182

Power Supply

	285
62	264
	62

Measurements in mm

Measurements in mm