Set screw
Safety Lock Nut
Safety Pins
Pulley Set Screw
Set screw
NOTE: Make sure set screws inside each pulley are clear of center hole before crank shaft is inserted in Step 6.
Step 5
Place the cooking grill on flat surface. Insert lift assembly down inside the channels of the cooking grill as illustrated.
Step 6
Insert safety pins below cooking grill to support the grill. Insert crankshaft through the lift assembly, first grill pulley, second grill pulley and through the other side of lift assembly.
NOTE: Make sure to insert crankshaft from the same side of lift assembly that the safety lock nut is welded to.
Step 7
With the cooking grill hanging freely, use an Allen wrench to tighten the pulleys securely to the crankshaft.
4