Assemble Additional Items | Philips iColor Cove QLX specs

Scope Of This Guide

3. Assemble Additional Items

To wire and mount an iColor Cove QLX fixture, you may need addi- tional parts and tools.

Power Supplies and Wiring

Install all power supplies, including any interfaces with controllers, before installing the iColor Cove QLX fixtures. One iColor Cove QLX leader cable is required to connect each run or series of fixtures to a power supply port. (The power supply and external controllers send control signals to the iColor Cove QLX fixtures over the leader cable. To configure the power supply — fixture connection, you will need the power supply installation or user guide for specific instructions.)

If jumper cables are required to add space between fixtures, make sure that they are available.

Mounting Tracks

iColor Cove QLX fixtures can be mounted directly to a wall, ceiling, cabinet or other secure surface. For straight linear applications, several iColor Cove QLX fixtures may be snapped into an optional four-foot long mounting track to ensure a straight run. If the track is specified in the plans, make sure it is available.

Tools and Supplies

You will need these tools and supplies:

•General tools to secure fixtures and mounting tracks (drill, screw- driver, level, measuring tools, etc.).

•#6 mounting screws or other hardware (bolts, nuts and washers, for instance) that is appropriate for the substrate.

4.Inspect The Fixtures and Accessories

Carefully inspect the cartons and boxes containing the iColor Cove QLX fixtures, the fixtures themselves, and all cables for any damage that may have occurred in transit.

WARNING

DO NOT USE A FIXTURE IF THE LENS, HOUSING, OR POWER CABLES ARE

DAMAGED.

FIXTURES HAVE NO USER SERVICEABLE PARTS. DO NOT ATTEMPT TO OPEN

THEM.

5. Install Mounting Tracks (Optional)

If the optional mounting tracks are used, install them now. Tracks can be easily cut to fit with a hacksaw or nippers. Make sure the tracks are firmly attached to the substrate with screws or other suitable connec- tors in all mounting holes. The screw heads may not rise above the interior rails.

Figure 1: Mounting Track Detail

6. Install The Fixtures

(See “iColor Cove QLX Wiring” on page 4 for an overview of these steps.)

1.Position the first fixture in the series. If a track is used, snap the fixture into the track and slide it into position. The leader cable will connect to this fixture’s male connector, so make sure that the fixture is installed so that the next fixture can plug into this fix- ture’s female connector.

2.Use four screws to secure the fixture. Most materials will require pilot holes for the screws. Mark the location of the holes using the fixture base as a guide.

3.Drill the pilot holes (through the track, if used) and mount the fix- ture with four #6 screws.

4.Position the next fixture in the series. Match its male connector to the female connector of the previous fixture. Snap it into the track (if used) and secure the fixture with four mounting screws.

5.Continue mounting the fixtures, making direct connections or inserting jumper cables as you go, until all lights in the series are mounted and connected.

6.Insert the terminator (packaged with the leader cable) into the last fixture of the series.

7.Make Electrical Connections

1.Verify that power in the line circuit to the power supply is OFF or that the power supply’s power cord is not connected.

2.Connect the leader cable to the first fixture in the run or series.

3.Connect the leader cable to the power supply.

WARNING

ENSURE THAT MAIN POWER SUPPLY IS OFF BEFORE INSTALLING OR

WIRING A FIXTURE.

4.Energize the power supply’s line circuit.

It is normal for some fixtures not to illuminate, because communi- cations between the power supply and fixtures has not been set up.

http://www.colorkinetics.com

iColor Cove QLX specifications

The Philips iColor Cove QLX is a cutting-edge lighting fixture designed to provide exceptional versatility and performance for indoor and outdoor spaces. As part of Philips' renowned iColor family, the QLX series stands out with its innovative features, advanced technologies, and sleek design, catering to the needs of architects, lighting designers, and event planners alike.

One of the primary features of the iColor Cove QLX is its compact form factor, measuring just a few inches in height. This compact design allows for seamless integration into various architectural settings, making it an ideal choice for coves, alcoves, and other tight spaces. Whether used for accent lighting, wall wash effects, or highlighting architectural details, the iColor Cove QLX delivers beautifully diffused light that enhances the aesthetics of any environment.

The QLX utilizes advanced LED technology, providing exceptional energy efficiency and long lifespan. With a myriad of colors available through its RGB color mixing capabilities, users can create dynamic lighting scenes tailored to any occasion. The fixture supports a 16.7 million color palette, allowing for smooth transitions and rich color saturation, ensuring that spaces are visually engaging and captivating.

The iColor Cove QLX also boasts a wide range of controllability options. Compatible with DMX and other control protocols, the fixture can be easily incorporated into existing lighting systems, enabling synchronized light shows and complex programming. Additionally, it offers various preset color modes and effects, allowing users to switch seamlessly between static colors, fading, and flashing sequences.

Another key characteristic of the iColor Cove QLX is its robust build quality. Designed for durability, it is rated for both indoor and outdoor use, with an IP65 rating that guarantees protection against dust and water ingress. This makes the fixture suitable for a variety of applications, from indoor retail spaces to outdoor architectural features.

Furthermore, the Philips iColor Cove QLX is designed with user-friendliness in mind. Its lightweight construction makes installation a breeze, and the inclusion of mounting brackets allows for versatile positioning options. Maintenance is minimal, thanks to the reliable LED technology that eliminates the need for frequent bulb changes.

In summary, the Philips iColor Cove QLX is a feature-rich lighting solution that combines aesthetic appeal with practical functionality. Its advanced technologies, energy efficiency, and robust design make it a top choice for those looking to elevate their lighting design projects, whether in commercial, residential, or public spaces. With the iColor Cove QLX, the possibilities for creating stunning lighting displays are virtually limitless.