Weber 55549 manual Replacing Main Burners, Crossover Ignition System Operations

Page 28

Maintenance

Replacing Main Burners

1)Your Weber® gas barbecue must be OFF and cool.

2)Turn gas OFF at source.

3)To remove control panel: take off the burner control knobs. Remove the screws holding the control panel in place. Lift off the control panel.

4)Unhook the manifold bracket(1) and unscrew the two wing nuts(2) that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down.

(1)

(2)

5)Slide the burner assembly out from under the guide screw and washer(1) in the corners of the cooking box.

(1)

6)Lift and twist the burner assembly slightly, to separate the crossover tube(1) from the burners. Remove the burners from the cooking box.

(1)

7) To reinstall the burners, reverse 3) through 7).

￿CAUTION: The burner openings(1) must be positioned properly over the valve orifices(2).

Check proper assembly before fastening manifold in place.

(2)

(1)

￿WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the barbecue. (See Step: “Check for gas leaks.”)

Crossover® Ignition System Operations

If the Crossover® ignition system fails to ignite the Left burner, light the Left burner with a match. If the Left burner lights with a match, then check the Crossover® ignition system.

Check that both the white(1) and black(2) ignition wires are attached properly.

(1)

(2)

Check that the Crossover® ignition button pushes the igniter (button) down, and returns to the up position.

If the Crossover® ignition system still fails to light, Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

E-2

Image 28
Contents N E S I S LP Gas Grill Owners GuideLiquid Propane GAS Units only Contents Warranty Customer Service Center Roselle Road, Suite Schaumburg, ILGeneral Instructions For Installation in CanadaOperating Cooking Exploded View Exploded View List Parts List Unpacking Ba300.a Page Page B301LP.e Page Page 810 Page Important LP Cylinder Information Connecting the Liquid PropaneCylinder To Connect the hose to the cylinder Check for gas leaks Refilling the Liquid Propane Cylinder Removal of the LP cylinderSafe handling tips for Liquid Propane Gas CylindersLiquid Propane Cylinder requirements For Canada onlyLighting To ExtinguishManual Lighting Problem Check Cure Annual Maintenance Main Burner Cleaning ProcedureWeber Spider /Insect screens Main Burner Flame PatternReplacing Main Burners Crossover Ignition System Operations