Weber 55259 manual Refilling the Liquid Propane Cylinder, Removal of the LP cylinder

	Gas Instructions
Check:		manufacturer has not resolved the issue to your
1) Hose-to-manifold connection.
		satisfaction, then contact the Customer Service
2) Regulator-to-Cylinder connection.
		Representative in your region using the contact information
WARNING: If there is a leak at connection (1),
retighten the fitting with a wrench and recheck for		sheet provided with your manual.
leaks with soap and water solution.
If a leak persists after retightening the fitting, turn OFF		Refilling the Liquid Propane Cylinder
the gas. DO NOT OPERATE THE GRILL. Contact the
Customer Service Representative in your region using		We recommend that you refill the LP cylinder before it is
the contact information sheet provided with your		completely empty.
manual.		Removal of the LP cylinder
Check:		1) Close cylinder valve (turn clockwise).
3) Valves-to-manifold connections.
		2) Unscrew regulator coupling by turning
4) The hose-to-regulator connection.
		counterclockwise, by hand only.
WARNING: If there is a leak at connections (2), (3) or
		3) Loosen cylinder lock wing nut and turn cylinder lock
(4), turn OFF the gas. DO NOT OPERATE THE
		up out of the way.
GRILL. Contact the Customer Service
		4) Lift cylinder off.
Representative in your region using the contact
		To refill, take LP cylinder to a “Gas Propane” dealer.
information sheet provided with your manual.
		WARNING: We recommend that your LP cylinder be
When leak checks are complete, turn gas supply OFF at
		filled at an authorized LP gas dealer, by a qualified
the source and rinse connections with water.
		attendant, who fills the cylinder by weight.
		IMPROPER FILLING IS DANGEROUS.
		CAUTION: When transporting the LP cylinder make
		sure the plastic dust cover is in place over the
		valve. This will keep dust and dirt from the
		threaded portion of the valve.

(1)

(1)

(2)

(3)

(3)	Checking the fuel level in your tank
	Check the fuel level by viewing the color indicator level
	line on the side of the tank scale.
	1)	Empty
	2)	Medium
	3)	Full
(4)		(1)	(2)	(3)

Liquid Propane Cylinder

The liquid propane cylinder manufacturer is responsible for the materials, workmanship and performance of the tank. If the tank has a defect malfunctions, or you have a question regarding the tank, call the tank manufacturer’s customer service center. The phone number is on the warning decal, which is permanently attached to the tank. If the tank

C-4