Weber A101.c, B067.E, C052.C manual Annual Maintenance, Check

Page 29

Annual Maintenance

After a period of nonuse, we recommend that you perform the following maintenance procedures for your safety.

WARNING: Check the hose before each use of the barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber authorized replacement hose. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

Inspect the burners for correct flame pattern. Clean if necessary, following the procedures outlined in the “General Maintenance” section of this manual.

Check all gas fittings for leaks.

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or flames will result in a fire or explosion, which can cause serious bodily injury or death, and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

Note - All factory-made connections have been thoroughly checked for gas leaks. The burners have been flame tested. As a safety precaution however, you should recheck all fittings for leaks before using your Weber Gas Barbecue. Shipping and handling may have loosened or damaged a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer- or store-assembled. You will need: a soap and water solution and a rag or brush to apply it.

To perform leak checks: Make sure all Burners are in the off position. Turn on gas supply.

WARNING: Do not ignite burners while leak checking.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form, or if a bubble grows, there is a leak.

Note - Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

Check:

1) Hose-to-manifold connection.

WARNING: If there is a leak at the hose-to- manifold connection(1), retighten the hose fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE.

Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

2)Valves-to-manifold connections.

3)The hose-to quick-disconnect connection.

WARNING: If there is a leak at connections (2) or

(3), turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual. When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(1)

(2)

(3)

*The grill illustrated may have slight differences than the model purchased.

Inspection and cleaning of the Spider/Insect screens

To inspect the spider/insect screens, remove the control panel. If there is dust or dirt on the screens, remove the burners for cleaning the screens. Refer to Maintenance, Replacing Main Burners. Brush the spider/inspect screens, lightly, with a soft bristle brush (i.e. an old toothbrush).

Caution: Do not clean the spider/insect screens with hard or sharp tools. Do not dislodge the spider/insect screens or enlarge the screen openings.

Lightly tap the burner to get debris and dirt out of the burner tube. Once the spider/insect screens and burners are clean replace the burners.

If the spider/insect screen becomes damaged or cannot be cleaned, call Weber-Stephen Products Customer Service for replacement parts.

D-4

Image 29
Contents Owners Guide Liquid Propane GAS Units only Customer Service Center Roselle Road, Suite Schaumburg, IL WarrantyContents General Instructions Genesis Silver-B Prem. NG Page Page Page Page Assemble frame Assemble wheel frameComplete frame assembly Continue frame assemblyInsert casters Add cooking box assemblyInstall manifold brackets Install igniter Test Connections Install Gas Supply General Specifications for PipingGas Line Piping Connect flexible hose to manifold Check that all burner valves are offCheck for gas leaks Install the slide out bottom tray Installing Features View inside of control panel Page Do not use the work surface as a cutting board You will need work surfacePage Installing the warming rack Installing the Warm-Up BasketInstall the thermometer Install the bottom shelfTo Extinguish LightingManual Lighting Cooking CleaningCheck Annual MaintenanceWeber Spider /Insect screens General MaintenanceReplacing Main Burners Crossover Ignition System Operations Burners burn with a yellow or Flame is low when burner is onOrange flame, in conjunction with Smell of gas
Related manuals
Manual 33 pages 26.59 Kb Manual 33 pages 33.03 Kb

B067.E, A101.c, C052.C specifications

Weber grills are renowned for their innovative designs, quality construction, and exceptional cooking performance, making them a favorite among grilling enthusiasts. Here, we take a closer look at three standout models: the Weber C052.C, B067.E, and A101.C. Each has unique features, technologies, and characteristics that cater to different grilling styles and preferences.

The Weber C052.C is a compact yet powerful model, perfect for small patios or balconies. This grill boasts efficient heat distribution, thanks to its porcelain-enameled cast iron cooking grates, which retain heat and ensure even cooking for delicious results. The built-in lid thermometer allows for accurate temperature monitoring, ensuring that your meals are cooked to perfection. Its compact design features foldable side tables, making it easy to store without sacrificing cooking space. The C052.C also incorporates Weber’s patented Flavorizer Bars, which catch drippings and infuse them back into the food for enhanced flavor.

In contrast, the Weber B067.E takes grilling to the next level with its expansive cooking surface and advanced features. This gas grill features multiple burners, providing unmatched flexibility for direct and indirect grilling. Its electronic ignition system ensures quick and easy startup, while the stainless steel heat deflectors ensure consistent heat across the entire grill surface. The B067.E also includes a side burner for extra cooking versatility, allowing users to prepare side dishes while simultaneously grilling. Additionally, the high-quality construction of this model includes rust-resistant materials, ensuring durability and long-lasting performance in various weather conditions.

Finally, the Weber A101.C is designed for the advanced griller seeking premium features and enhanced control. With a powerful multi-zone cooking system, the A101.C offers precise temperature management, allowing users to cook different foods at varying temperatures simultaneously. The integrated smart technology provides grill monitoring via a mobile app, enabling users to receive notifications and adjust settings remotely. This grill’s dual smoke system elevates the flavor profile of grilled foods with rich, smoky aromas. Constructed from heavy-duty stainless steel, it ensures long-lasting durability, while its elegant design adds a touch of sophistication to any outdoor kitchen.

Whether you prefer the compact simplicity of the Weber C052.C, the versatile performance of the B067.E, or the advanced technology of the A101.C, Weber offers a grill to meet your outdoor cooking needs. Each model exemplifies the brand’s commitment to quality, innovation, and an unmatched grilling experience, making them excellent choices for both novice and experienced grillers alike.