GAS Instructions, Install GAS Supply, GAS Line Piping

GAS INSTRUCTIONS	7

Slide out Bottom tray - Remove excess grease, then wash with warm soapy water, then rinse.

Flavorizer® bars and Cooking grates - Clean with a suitable brass bristle brush. As needed, remove from grill and wash with warm soapy water, then rinse with water.

Catch pan - Disposable foil trays are available, or you can line the catch pan with aluminum foil. To clean the catch pan, wash with warm soapy water, then rinse.

Thermometer - Wipe with warm soapy water; clean with plastic scrub ball.

Inside cooking module - Brush any debris off of burner tubes. DO NOT ENLARGE BURNER PORTS (OPENINGS). Wash inside of cooking box with warm soapy water and a water rinse.

Inside Lid - While lid is warm, wipe inside with paper towel to prevent grease build-up. Flaking built-up grease resembles paint flakes.

Stainless steel surfaces - Wash with a soft cloth and a soap and water solution. Be careful to scrub with the grain direction of the stainless steel.

Do not use cleaners that contain acid, mineral spirits or xylene. Rinse well after cleaning.

Preserve Your Stainless Steel - Your grill or its cabinet, lid, control panel and shelves may be made from stainless steel. To keep the stainless steel looking its best is a simple matter. Clean it with soap and water, rinse with clear water and wipe dry. For stubborn particles, the use of a non-metallic brush can be used.

IMPORTANT: Do not use a wire brush or abrasive cleaners on the stainless steel surfaces of your grill as this will cause scratches.

IMPORTANT: When cleaning surfaces be sure to rub/wipe in the direction of the grain to preserve the look of your stainless steel.

GAS INSTRUCTIONS

INSTALL GAS SUPPLY

GENERAL SPECIFICATIONS FOR PIPING

Note: Contact your local municipality for building codes regulating outdoor gas barbecue installations. In absence of Local Codes, you must conform to the latest edition of the National Fuel Gas Code: ANSI Z 223.1/NFPA 54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code. WE RECOMMEND THAT THIS INSTALLATION BE DONE BY A PROFESSIONAL.

Some of the following are general requirements taken from the latest edition of the National Fuel Gas Code: ANSI Z 223.1/NFPA 54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code for complete specifications.

•This barbecue is designed to operate at 4.5 inches of water column pressure (.163 psi).

•A manual shut-off valve must be installed outdoors, immediately ahead of the quick disconnect.

•An additional manual shut-off valve indoors should be installed in the branch fuel line in an accessible location near the supply line.

•Pipe compound should be used which is resistant to the action of natural gas when connections are made.

•The outdoor connector must be firmly attached to rigid, permanent construction.

WARNING: Do not route the 10 foot hose under a deck. The hose must be visible.

GAS LINE PIPING

•If the length of the line required does not exceed 50 feet, use a 5/8" O.D. tube. One size larger should be used for lengths greater than 50 feet.

•Gas piping may be copper tubing, type K or L; polyethylene plastic tube, with a minimum wall thickness of .062 inch; or standard weight (schedule 40) steel or wrought iron pipe.

•Copper tubing must be tin-lined if the gas contains more than 0.3 grams of hydrogen sulfide per 100 cubic feet of gas.

•Plastic tubing is suitable only for outdoor, underground use.

•Gas piping in contact with earth, or any other material which may corrode the piping, must be protected against corrosion in an approved manner.

•Underground piping must have a minimum of 18" cover.

TEST CONNECTIONS

All connections and joints must be thoroughly tested for leaks in accordance with local codes and all listed procedures in the latest edition of the National Fuel Gas Code: ANSI Z 223.1/NFPA 54, or CAN/CGA-B149.1

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for gas leaks. This will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

WWW.WEBER.COM®

43146 specifications

The Weber 43146 is a highly regarded grill cover designed specifically for Weber's Spirit II and Spirit grill models. This thoughtfully engineered accessory is essential for anyone looking to protect their grill from the elements and ensure its longevity.

One of the main features of the Weber 43146 grill cover is its durable construction. Made from high-quality, weather-resistant material, it safeguards the grill against rain, snow, and UV rays, which can cause fading and deterioration over time. The cover is also designed to fit snugly around the grill, preventing it from blowing away even in strong winds. This form-fitting design not only provides protection but also maintains the aesthetic appeal of your outdoor space.

In terms of technology, Weber has implemented advanced fabric technology in the 43146 cover. The material is specifically engineered to resist water while allowing moisture to escape, preventing rust and mold buildup on the grill. Additionally, the cover comes with reinforced stitching and is designed to withstand extreme temperatures, making it reliable in various weather conditions.

Another characteristic of the Weber 43146 is its ease of use. The cover features convenient handles that make it simple to put on and remove, allowing for quick access to your grill when you’re ready to cook. Its lightweight yet sturdy design means that users can handle it without difficulty, ensuring that grilling remains a hassle-free experience.

Compatibility is another key feature of the Weber 43146. It is designed to fit perfectly on various models of the Spirit series, ensuring that your investment is well protected. This versatility means that whether you own a compact unit or a larger grill, the cover will snugly accommodate your appliance.

Overall, the Weber 43146 grill cover is an essential accessory for grill enthusiasts. Its durability, innovative fabric technologies, and user-friendly design make it a must-have for protecting an outdoor grill. With the Weber 43146, you can enjoy peace of mind knowing your grill will remain in pristine condition, allowing you to focus on what really matters—creating delicious meals for family and friends in your backyard.