Weber 500 LX Series Annual Maintenance, MWARNING Do not ignite burners while leak checking

Page 27

Annual Maintenance

After a period of nonuse we recommend that you perform the following maintenance procedures for your safety.

mWARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber authorized replacement manifold assembly. Order from Weber- Stephen Products Co., Customer Service Center or authorized dealer.

Inspect the burners for correct flame pattern. Clean if necessary, following the procedures outlined in the "General Maintenance" section of this manual.

Check all gas fittings for leaks.

mDANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. This will result in a fire or explosion which can cause serious bodily injury or death, and damage to property.

mWARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

You will need: a soap and water solution and a rag or brush to apply it.

To perform leak checks: Make sure all burners are in the OFF position. Turn on gas supply.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows there is a leak.

Note - Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

mWARNING: Do not ignite burners while leak checking.

Check:

a)Hose to manifold connection. Figure 8 (a).

b)Regulator to tank connection. Figure 8 (b).

mWARNING: If there is a leak at connection (a), retighten the fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact

Weber-Stephen Customer Service.

Check:

c)Valves to manifold connections. Figure 8 (c).

d)The hose to regulator connection. Figure 8 (d).

mWARNING: If there is a leak at connections

(b), (c) or (d), turn OFF the gas. DO NOT OPERATE

THE BARBECUE. Contact Weber-Stephen Customer Service.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(a)

(b)

(c)

(d)

Figure 8

Inspection and Cleaning of the Weber Spider Stopper Guards

To inspect the Spider Stopper Guards, remove the control panel and look to see if they have dust or dirt on their outside surfaces. If they are dirty, brush off the outside surface of the Spider Stopper Guards with a soft bristle brush (an old toothbrush for example). Check that there are no gaps in the Spider Stopper Guards’ seams or in the fit around the burners or valves. (See Section "General Maintenance".)

27

Image 27
Contents Spirit 500 LX Series LP GAS Units only MDANGER MWARNINGSWarranty Patents and Trademarks Contents Operating area For Installation in CanadaGeneral Instructions StorageAssembly Check package contentsStep REB Check contents of hardware packs Assemble top frame Assemble wheel frameContinue frame assembly Install tubing plugsAdd front panel Add cooking box Install tank panel assembly and frame connector Install manifold bracketInstall igniter Add fuel scale assemblyMCAUTION Do not remove adjustment wing nut from tank scale Set LP fuel scaleFill LP tank Connect LP tank Check that all burner valves are offCheck for gas leaks MWARNING Do not ignite burners when leak checkingCooking box with finger grip toward you. Figure Install Flavorizer Bars and Cooking GratesInstall the bottom tray Slide the bottom tray onto the mounting rails underAdd tool holders, control panel and burner control knobs Install LidComplete accessory installation To Extinguish LightingManual Lighting Storage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseConnecting the filled LP tank Refilling the LP tankRemoval of the LP tank Engaged DOT 4BA240 Safe handling tips for LP GasAnnual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsMWARNING Do not ignite burners while leak checking Weber Spider Stopper Guards General MaintenanceMain Burner Cleaning Procedure MCAUTION Do not enlarge the burner ports when cleaningTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations MCAUTION Do not line the bottom tray with aluminum foil Burner does not light, or flame is low in High position11-12 56 47-49 46 50 52-53 Parts List Page Page Final Word Thanks

500 LX Series specifications

The Weber 500 LX Series is a hallmark of outdoor grilling excellence, designed for both novice and seasoned grill masters. With its sleek stainless-steel construction and modern aesthetics, this series not only elevates the look of your outdoor space but also enhances your cooking experience.

One of the standout features of the Weber 500 LX Series is its powerful heating capabilities. Equipped with high-performance stainless-steel burners, this grill delivers even heat distribution and excellent temperature control. The burners are designed to ignite quickly, providing instant heat when you need it most. With precision temperature controls, you can effortlessly sear, roast, and even smoke your favorite dishes.

In terms of cooking space, the Weber 500 LX Series offers ample room, often featuring up to 650 square inches of primary cooking area. This generous space allows for grilling multiple items simultaneously, whether it’s burgers, steaks, or vegetables. The series also typically includes a secondary cooking area, perfect for warming buns or cooking sides.

One of the most notable technological advancements in the Weber 500 LX Series is the integrated iGrill technology. This Bluetooth-enabled thermometer allows you to monitor meat temperatures from your smartphone, ensuring perfectly cooked meals every time. The digital display provides accurate readings, making it easier to achieve your desired doneness.

Additionally, the series comes equipped with a variety of practical features. The built-in LED lights illuminate your cooking area for nighttime grilling, and the stainless-steel work tables offer convenient preparation space. Many models in the series also include a rotisserie kit, allowing you to cook whole chickens or lamb with ease.

Durability is another hallmark of the Weber 500 LX Series. The grill features a robust construction that withstands the elements, ensuring years of outdoor enjoyment. The easy-to-clean grease management system also aids in maintaining the grill and simplifies post-cooking cleanups.

In summary, the Weber 500 LX Series is a blend of style, functionality, and advanced technology. With its powerful performance, ample cooking space, and user-friendly features, it stands out as a top choice among outdoor enthusiasts and culinary adventurers alike, promising memorable grilling experiences for years to come.