Gas Instructions |
Reinstall control panel |
| |
Parts required: control panel, screws, and burner control |
| |
knobs. |
| |
Place the control panel back onto the control panel | (1) | |
brackets on either side of the front of the cooking box. | ||
| ||
Line up screws with screw holes on both the control panel |
| |
and control panel brackets. Tighten screws. | (2) | |
Reinstall burner control knobs & igniter wires (if |
| |
necessary). |
| |
Place corresponding control knobs down onto the valve |
| |
stems. From the underside of the control panel, replace the |
| |
two wires (1, 2) of each igniter. |
|
- | + | - | + |
|
|
- | + | - | + |
|
|
| a |
| a | c | d |
| b |
|
| b | |
|
|
|
|
|
a = Yellow Tab with Black Wire |
| a = Yellow Tab with Black Wire |
b = White Tab with Black Wire |
| b = White Tab with Black Wire |
|
| c = Green Tab with Black Wire |
| ||
|
| d = Grounding Wire |
|
|
|