40
Make sure grill is turned off and cool before installing the Weber® Grill Out® Table Light.
Light should only be mounted to side work surface tables. For
Do not mount to hot surfaces.
Light should not be mounted on or near sideburner or sideburner area. Do not mount directly to cookbox, kettle or handles.
Do not bend flexible arm more than 90 degrees in any direction.
Do not place the Weber® Grill Out® Table Light directly over cookbox.
1
a 
b 
The Weber® Grill Out® Table Light bracket can be attached to your grill’s side table vertically(a) or horizontally(b). Follow installation instructions below:
2
a
b
Tighten the large bracket screw to a point where it’s snug, and then turn a 1/4 turn.
Insert the flexible arm of lightpod assembly through both holes of bracket.
Tighten the bracket thumbscrew to a point where it’s snug, and then turn a 1/4 turn.
www.weber.com®