Installation, Preface, Precautions | Panasonic WV-CF224 instruction

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Color CCTV Camera

Operating Instructions

Model No.WV-CF224

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.


i	ADE03S	2 3
i
o
!0	ON	1
!0	ON

		O
	1	N
	2	A
	2	D
e		E
	3	0
	3	3
		S

r t

qCamera Panel

OFF

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral trian- gle, is interned to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient

SA 1965 magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and mainte-

N0503-1103 3TR001728BAA Printed in Japan

For U.S.A

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manu- al, may cause harmful interference to radio com- munications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

The serial number of this product may be found on the top of the unit.

You should note the serial number of this unit in the space provided and retain this instruction as a per- manent record of your purchase to aid identification in the event of theft.

wPan/Tilt/Azimuth Table

Adjusts the panning/tilting and azimuth angle of the camera.

eFocus Lever

Fixes the focus position after adjusting.

rZoom Lever

Fixes the zoom position after adjusting.

tVideo Jack (3.5-diam. mini jack)

For connecting an LCD monitor to adjust the camera images. Use an L-type plug to save space.

yVideo Output Connector

Supplies the video output signals. The sig- nals will be interrupted when the video jack is connected to an LCD monitor.

uPower Cable

Supplies 24 V AC or 12 V DC from an exter- nal power source.

				3
AP	SHARP*	SOFT

				2
BLC	ON	OFF*	ON

				1
SYNC	INT*	LL

iAperture Level Selector

SHARP: Sharpens the image outline.

SOFT: Softens the image outline. The default setting is SHARP.

oBack Light Compensation Selector

ON: Compensates the background if it is brighter than the object.

OFF: Does not compensate. The default setting is OFF.

!0Synchronization Mode Selector Specifies a source for synchronization. INT: Internal 2:1 interlace.

LL:Line-lock mode driven by 24 V AC. The default setting is INT.

Note: Do not set the switch to LL (Line- Lock) position when supplying 12 V DC to avoid synchronization error.

!1Panel Cover

	nance (servicing) instructions in the
	literature accompanying the appli-
SA 1966	ance.
SA 1966

Model No.

WV-CF224

Serial No.

INSTALLATION

■Installation Plans & Preparations

■Mounting the Camera

WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

PREFACE

The WV-CF224 is a 1/4-inch CCD color camera	The camera features a high picture quality
designed for use in video surveillance systems.	thanks to the use of digital signal processing
	LSIs, and easy mounting on the ceiling or wall.

PRECAUTIONS

The camera can be installed on a junction box or directly on the wall/ceiling.

Front / Upper

				46 mm
				(1-13/16")	4-ø4.5 mm
					4-ø4.5 mm
					(4-ø3/16")
ø135 mm	(5-5/16")	32.5 mm	(1-1/4")		83.5 mm	(3-5/16")
					Cable access hole
					ø18 mm (11/16")

Disassembly of the camera

1.Remove the panel cover with a Phillips screwdriver.

2.Turn the panel cover counter-clockwise.

3. Remove the panel cover.

1.This product should be installed and con- nected by qualified service personnel or system installers in conformity with NEC.

2.Use a class 2 power source supplying 12 V DC or 24 V AC.

3.To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera.

4.Be sure to use a ceiling board/wall having enough strength to support this camera.

5.Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Ask qualified service personnel for servic- ing.

6.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be dam- aged by improper handling or storage.

7.Do not use strong or abrasive detergents.

Use a dry cloth to clean the camera body when dirty.

In case the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remaining deter- gent with a dry cloth.

8.Clean the lens faceplate with care.

Do not clean the lens with strong or abra- sive detergents. Use lens tissue or a cotton tipped applicator and ethanol.

9.Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

10.Do not operate the camera beyond its specifications.

Use the camera under conditions where temperature is between –10 °C to +50 °C (14 °F to 122 °F), and humidity is below 90%. The input power source is 24 V AC or 12 V DC.

11.Use a monitor whose resolution is at least equal to that of the camera.

	Sideway cable exit
1.	Locally procure four camera-mounting
	screws suitable for the installation surface
	and structure of the wall/ceiling or junction
	box. There are four 4.5 mm (3/16”) diame-
	ter screw holes and a guide hole on the
	camera panel.
2.	Preparations
•	When planning to use a junction box, pro-
	cure one locally that meets the dimensions
	in the figure.
•	When directly mounting on the wall/ceiling,
	prepare a space which is ø135 mm or larg-
	er.
3.	Cable route
•	When using a junction box, cables will go
	behind the junction box via the cable	4. Remove the inner dome.
	access hole on the camera panel.	4. Remove the inner dome.
	access hole on the camera panel.
•	When directly mounting on the wall/ceiling,
	you need to cut out the panel cover to
	make a sideway exit for cables.

WV-CF224 specifications

The Panasonic WV-CF224 is a high-performance dome camera that has gained popularity in the surveillance market due to its advanced features and reliability. Designed for both indoor and outdoor usage, this compact camera is ideal for various security applications, from retail settings to commercial buildings.

One of the main features of the WV-CF224 is its ability to provide exceptional image quality. The camera is equipped with a 1/3-inch CCD sensor, which captures images at a resolution of 480 TV lines. This technology ensures sharp and clear video output, even in environments with challenging lighting conditions. The camera also boasts a sensitivity rating of 0.4 lux in color mode and 0.05 lux in black-and-white mode, making it suitable for low-light scenarios.

The WV-CF224 features a built-in 3.5-8mm varifocal lens, enabling users to adjust the field of view according to their specific monitoring needs. This versatility allows for easy installation in a variety of settings, whether it’s capturing wide-angle shots of larger areas or focusing on specific subjects within a scene.

Another significant characteristic of the WV-CF224 is its robust construction. The camera is designed to withstand harsh environmental conditions, making it suitable for outdoor use. It features an IP66-rated weatherproof housing that protects internal components from dust and water, ensuring reliable operation in various weather conditions.

The camera also incorporates advanced digital signal processing (DSP) technology that enhances image performance. This technology includes features such as automatic white balance, backlight compensation, and noise reduction, which all contribute to improved image quality and detail, even under difficult lighting conditions.

For ease of integration with existing surveillance systems, the WV-CF224 supports both analog and digital video output options. Its compatibility with a wide range of DVRs and monitoring systems enables seamless installation and operation.

In summary, the Panasonic WV-CF224 is a versatile and reliable surveillance solution featuring a high-resolution CCD sensor, adjustable varifocal lens, and robust weather-resistant housing. These characteristics make it a prime choice for users seeking an effective camera for comprehensive monitoring in various environments. With its excellent image quality, advanced processing capabilities, and reliable construction, the WV-CF224 stands out as a top contender in the market for security cameras.