Choose a good, cleared assembly area and get a friend to help you put your smoker together. Carefully remove all components from Smoker Box. Lay cardboard down to protect smoker finish and assembly area.
Step 1
Attach the smoker box handle by inserting the handle through the hole in smoker box door. Place the handle spring and washer onto the handle. Compress the spring and washer to the door and insert the cotter pin to secure.
WARNING: Use caution when lifting or moving smoker to prevent strains and back injuries. Moving smoker may require the help of an additional person.
NOTE: With the help of a friend, turn the smoker box with legs upside down. Make sure door is securely latched to avoid injury.
Step 2
Attach a locking caster to the bottom of each leg. Screw into holes and tighten with an adjustable wrench.
Smoker Box Leg Locking Caster
Smoker Box
Door
Smoker Box 
Handle 
Cotter Pin
Spring
Washer
4