Brinkmann owner manual ProSeries 4655 Assembled

Page 32

	Step 28
	Remove igniter cap and insert
	battery with positive end of battery
	toward igniter cap. Replace igniter
	cap and make sure the igniter is
	working properly.
Igniter Cap	Battery
	Step 29
	Attach the loop strap bracket onto
	the base panel using two M6 X
	15mm bolts.

ProSeries 4655 (Assembled)

31

Image 32

Contents Gas Outdoor Grill Important Safety Table of Contents General Warnings Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Installing the LP GAS Cylinder Onto the Grill Regulator Resetting ProcedureFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator to AN LP GAS Cylinder Connecting Hose and RegulatorChecking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Operating the Grill Breaking in Your GrillPreheating the Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerHelpful Hints CleanlinessGrilling to Proper Temperature Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCECooking Grills Heat Distribution PlatesTransporting and Storage Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Step With star washers Attach the door handles using two M4 X 40mm bolts Place the basket into basket brackets and the basket guide Step Place side burner grate on side burner Step ProSeries 4655 Assembled Accessories 33800-468-5252 Page Warranty