Door Hinge Pin Holes
Locking Caster
Hex Nut Wrench
Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.
CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.
Step 1
Attach cart base to side panels. Insert four M6 X 50mm bolts through cart base and into legs and tighten securely. Be sure the door hinge pin holes face forward.
Step 2
Attach back panel to legs using four M6 X 50mm bolts. (Hand tighten only at this point.)
Note: With the help of a friend, turn the cart assembly over. Try to minimize the stress to the legs.
Step 3
Attach locking casters to the bottom of the legs. Tighten caster bolts securely using hex nut wrench provided in parts pack.
24