ViewSonic VS10083 manual Sjt

Page 16

................. UL

SEV

............. CSA

BASE/BS

................. VDE

Electric Appliance Control Act

IEC-60320

,

A1

A1

 

A2

In the United States and Canada the male plug is a NEMA5-15 style (

A2), UL Listed, and CSA

Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For

units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according

to the current rating for your unit. Please consult the table below for the selection criteria for power cords

used in the United States and Canada.

 

Cord Type

Size of Conductors in Cord

Maximum Current Rating of Unit

 

 

 

SJT

18 AWG

10 Amps

 

16 AWG

12 Amps

 

14 AWG

12 Amps

 

 

 

SVT

18 AWG

10 Amps

 

17 AWG

12 Amps

 

 

 

In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR- Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

Green-and-Yellow: Earth

Blue: Neutral

Brown: Live

If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product.

ViewSonic E71f 15

Image 16
Contents E71f Color Monitor OSD ViewSonic E71f INF/ICM INF ICM Vesa 1024 x 768 @ 75 Hz OnView Main Menu Contrast Main Menu Color Select CRT ViewMeter 75 Hz Main Menu Degauss ViewSonic Viewsonic.com.cn 0800 Service.cn@ 021 Cn.viewsonic.com ViewSonic Viewsonic CRT SJT ViewSonic E71f ViewSonic→ Corporation