Omron Healthcare NE-U17 Parts that can be disinfected by boiling, Fill the cooling water

Page 10

How to Prepare the Unit before Inhalation

– Clean the parts before starting the inhalation.

[Parts that can be disinfected by boiling]

(For the disinfecting method, refer to Page 17.)

Submerge these parts in a container filled with sufficient water and boil for 10 minutes.

Medication cup cover

Washer

Inhalation hose (M)

with a cuff

How to remove the washer

Place the medication cup cover on its side and insert a small item (such as a paper clip) into the hole of the cover.

Pinch and remove the washer gently.

How to attach the washer

Hold the medication cup cover and place the washer securely with your fingertips as illustrated in the figures on the left.

Make sure the washer is placed flat and not upside down.

1 Filling the cooling water.

1)Remove the nebulisation section by rotating the medication cup cover-fixing lever clockwise.

1

2

 

 

water

 

level

2) Fill the cooling water.

Fill the cooling water up to the “water level” mark that specifies the water level in the water tank. The proper amount is approximately 375 ml.

water level

[Parts that cannot be disinfected by boiling]

(For the care and disinfection, refer to Page 17.)

 

Air duct cover

Mouthpiece

Air filter case

set

Air filter

 

 

Fan cover

 

Medication cup holder

Medication cup

Fan

Warning

Be sure to immediately dry the cleaned and disinfected parts, then store them in a dry place in order to prevent them from getting contaminated in the future.

water level

–If the water level in the water tank is lower than the “water level” mark, a “lower water level in water tank” error will be displayed.

–If the water temperature in the water tank is low, the nebulisation rate may drop. (Recommended temperature is approximately 26°C (78.8 °F).

–Replace water in the water tank each time the unit is used.

–When the unit is used for a long time continuously, replace water at least every twenty-four hours.

(For continuous use or long periods, refer to Page 13.)

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Omron Ultrasonic Nebuliser Exemptions from Liabilities Intended Use Contents Page Maintenance How to handle faults or accidentsFeatures of the Product Features of the ProductAbout the principle of nebulisation in the NE-U17 Composition of the Product Description of the LCD DisplayNebulisation unit Names of the PartsBack Main unit Top of the main unit Fill the cooling water Parts that can be disinfected by boilingParts that cannot be disinfected by boiling By turning it clockwise, then install It to the main unitHow to Inhale Timer, push the START/STOP Button Example of correct use When the timer is usedWrong examples of use To terminate inhalation while using When the inhalation is finished, turnHow to Inhale Using Optional Parts Using the unit for a long timeUsing a bacterial filter How to Take Care of the Unit How to Take Care of the PartsHow to Take Care of the Fan How to Take Care of the Air FilterHow to Take Care of the Main Unit Disinfection by disinfectant How to Disinfect the UnitHow to Disinfect the Unit Typical disinfectants that can be usedSterilization with ethylene oxide gas E.O.G How to Disinfect and Store the UnitHow to store the unit Sterilization by autoclaveTroubleshooting Trouble Where to Inspect How to CorrectSpecifications Technical dataSpecifications List of Optional Parts 20/22mm, ISO compatibleMade in Japan

NE-U17 specifications

The Omron Healthcare NE-U17 is a cutting-edge nebulizer designed to deliver effective aerosol medication directly to the lungs. This device caters to users of all ages and is particularly beneficial for individuals suffering from respiratory conditions such as asthma, COPD, and other chronic pulmonary diseases. With its innovative design and advanced features, the NE-U17 provides an efficient and user-friendly experience.

One of the standout features of the Omron NE-U17 is its compact and lightweight design, making it highly portable. Weighing just around 400 grams, users can easily transport the nebulizer, making it suitable for home, travel, or outdoor use. The sleek, ergonomic shape ensures comfortable handling during treatments, allowing for easy operation.

The NE-U17 utilizes advanced mesh technology, which allows for a fine aerosol mist that can penetrate deep into the lungs. This technology ensures efficient medication delivery, maximizing the therapeutic effectiveness of inhaled medications. The device operates at a high nebulization rate, facilitating quicker treatment sessions without sacrificing medication delivery.

An essential aspect of patient adherence to treatment is the ease of use. The Omron NE-U17 features a one-button operation, simplifying the nebulization process for users. This user-friendly design is particularly beneficial for children and the elderly, ensuring that anyone can easily use the device without complex setup procedures. Additionally, the device operates quietly, which enhances comfort during use, especially for young children or those who may be sensitive to noise.

The Omron NE-U17 is compatible with a range of respiratory medications, making it a versatile choice for various treatment plans. The device is designed for efficient cleaning and maintenance, ensuring longevity and reliability. With a simple disassembly process, users can easily clean and disinfect the components to stay compliant with health standards.

In conclusion, the Omron Healthcare NE-U17 offers an array of features and technologies that make it a leading option for those in need of respiratory therapy. Its compact design, advanced mesh technology, ease of use, and compatibility with various medications make it a preferred choice among patients and healthcare providers alike. This nebulizer is not only an essential tool for effective medication delivery, but it also enhances the overall user experience, making respiratory treatment as seamless as possible.
Top Page Image Contents