Mounting Screw
Bottom Leg |
| Flat Washer |
|
| |
| Lock | Top Leg |
|
| |
| Washer |
|
Wing Nut
FIGURE 3 - ASSEMBLING THE LEGS
ATTACHING LEGS TO THE SEAT
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.
WITHOUT BACK (FIGURE 4)
1.Place seat upside down on ground/floor.
2.Align seat legs with seat.
3.Loosely install the four (4) screws through the seat legs and into seat.
4.Once all screws are inserted, torque to
5.Refer to ADJUSTING THE LEG EXTENSIONS in this instruction sheet.
Seat | Mounting Screws | |
Legs | ||
|
Seat
FIGURE 4 - ATTACHING LEGS TO THE SEAT - WITHOUT BACK
WITH BACK (FIGURE 5)
1.Place seat upside down on ground/floor.
2.Align seat legs with seat.
3.Align back support tubes above the seat legs as shown in FIGURE 5.
4.Loosely install the four (4) mounting screws through the back support tubes, seat legs and into seat.
5.Once all mounting screws are inserted, torque to
6.Refer to ADJUSTING LEG EXTENSIONS in this instruction sheet.
Part No. 1073902 | 3 | HYGIENIC SHOWER CHAIR |