Walgreens BD-1234W manual Reset Function, Taking Care of Your Monitor

Recalling Stored Measurements

5.Follow steps 1-3 once again to review measurements in another zone.

	M
	E
	M
	O
	R
	Y
*Fig.1	*Fig.2

Reset Function

Your Walgreens monitor will not lose the data stored in the memory even when you change the batteries. To erase all of the data in memory zone, refer to the instructions below.

Note:Single measurements cannot be erased.

Warning: Resetting the memory will permanently erase all of the stored data in the memory zone that you select.

Press (Up) (Down) to choose a zone: 1, 2, or 3.
•
Press the MEMORY button. (Fig. 3)
•	(Up) button at the same time to clear
Press the MODE and
•

all of the stored data. (Fig. 4)

M
E
M
O	MODE
OR
RY	MODE
Y
*Fig.3	*Fig.4

20

Taking Care of Your Monitor

It’s important to treat your monitor with care. Here are some basic tips:

✓Keep the monitor out of direct sunlight, high humidity and

extreme temperature changes.

✓Try not to drop it on the floor.

✓Do not take the monitor or the cuff apart. None of the monitor’s parts are fixable at home. If your monitor needs repair, see details in the warranty section of this manual.

✓Keep the monitor free of dust and other materials. Avoid getting any part of the monitor or cuff extremely wet. If the monitor needs cleaning it’s best to wipe it with a cloth slightly dampened with water. We recommend that you clean your monitor about once a month.

✓Do not harshly fold or bend the cuff as this may damage it on the inside.

✓Do not inflate the monitor’s cuff if it is not wrapped around your arm.

✓Always remove the cuff tube from the monitor with care.

✓For your safety, do not wrap the cuff around any other body part other than your arm.

21