Omron RX-1 instruction manual Fitting the cuff, To measure on the right wrist

Page 4

2. Fitting the cuff

Place the cuff on your left wrist with your thumb pointing up. Align the edge of the cuff as shown in the diagram.

10 - 15mm

Place the wrist cuff on bare skin. Keep it clear of your clothing but do not roll up your sleeve.

English

If the cuff is not fitted comfortably and firm- ly, correct measurement is not possible.

The remaining part of the wrist cuff can be conveniently folded back out of the way.

Hold the bottom part of the cuff as shown in the diagram and wrap it around your wrist while pulling so that it fits comfortably.

If your finger touches the shoulder, it is the right level.

(3)Relax your arm and shoulder.

To measure on the right wrist

Measurement can also be made on the right wrist. Fit as shown in the diagram.

(1)Rest your arm across your chest so that the RX-I is at the same level as the heart.

(2)Be sure to sit on a chair and take a correct posture.

(4)Wrap the wrist cuff comfor- tably.

4

Image 4
Contents Page Contents Description of the monitorHow to measure your blood pressure Inserting the batteriesFitting the cuff To measure on the right wristEnglish How to erase the memory How to recall previous measured values from the memoryMemory function Possible faults, their causes and rectification Maintenance and storageSpare parts & accessories Technical dataCalibration General information about blood pressure Health and blood pressure