14/1, 42.#%+06* $#664+5, #76+10 | Radio Shack 63-1036 instruction

www.radioshack.com™

OWNER’S MANUAL —

Please read before using this equipment.

+PFQQT"6JGTOQOGVGT

YKVJ"+PFQQT"*[ITQOGVGT

63-1036

°"*+06"°"

Before Using Your Thermometer

Remove the protection film from the display.

The thermometer also comes with a battery insulation sheet for saving the batteries during shipment. Pull this plastic strip out of the battery compartment.

ýR"9#40+0)ýR"

• Keep the batteries out of reach of

children. Swallowing button-cell can

be fatal.

MAX/MIN — Press to recall the highest				Dual Display — Lets you read both the
and lowest temperatures and humidity				current temperature and humidity at the
readings.				same time.

	MEM — Press to turn memory on or off.	LIGHT — Press and hold down to
	Memory initializes maximum and minimum	engage the display’s backlight.
	Memory initializes maximum and minimum	Release to extinguish the backlight.
	readings.	Release to extinguish the backlight.
	readings.

• Dispose of the old battery promptly

and properly. Do not burn or bury it.

."%#76+10".

•Use only a fresh battery of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline).

±"016'"±"

BBmay appear in the display when the relative humidity falls below 20%, regardless of the temperature range.

Memory Mode

The thermometer / hygrometer only retains temperature and humidity readings when the memory is active. Turning off the memory mode or removing the batteries clears all readings.

Installing the Batteries

If the thermometer does not operate after you install the batteries, simply remove and re-install the batteries.

Your RadioShack Digital Indoor Thermometer with Indoor Hygrometer is a useful addition to your home or office. It tells you the current indoor temperature as well as the highest and lowest temperature and humidity readings. The memory mode lets you recall and view temperature and humidity readings at any time. Its small size and fold- out stand let you place it almost anywhere for easy viewing.

/'/14;"/1&'

Press MEM to activate the memory mode. C;C appears in the display.

To view the highest temperature and humidity reading, press MAX/MIN until C7N appears in the display.

To view the lowest temperature and humidity reading, press MAX/MIN until C?D appears in the display.

To deactivate the memory mode, press MEM again. C;C disappears.±

4'2.#%+0)"6*'" $#66'4+'5

Your thermometer requires two LR 44 button cells batteries (supplied). Replace the batteries if the display or backlight dims or disappears. You may also need to replace the batteries if the thermometer stops working properly.±

For the best performance and longest life, we recommend RadioShack alkaline batteries.R.

1.Slide open the battery cover in the direction of the arrow at back of the unit.

Battery Compartment

Fold-Out Stand – Lift up.

2.Install two LR 44 button cells batteries in the compartment with the positive (+) symbols facing upward.

#"+/2146#06"#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

Rý— Warning

.— Caution

# — Important

°— Hint

± — Note

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

63-1036 specifications

Radio Shack, a well-known name in consumer electronics, has produced a variety of devices throughout its history. One of its notable products is the Radio Shack 63-1036, a versatile and compact electronic compact multimeter. Favored by hobbyists and professionals alike, the 63-1036 is designed to provide accurate measurements in a portable package.

The Radio Shack 63-1036 features a robust digital display that ensures easy-to-read measurement results. This multimeter can measure a variety of electrical parameters including voltage, current, and resistance, making it an invaluable tool for electrical diagnosis and testing. The device supports both AC and DC measurements, allowing users to check power supplies, batteries, and various electrical components with confidence.

In terms of technology, the 63-1036 employs a digital system which enhances accuracy compared to traditional analog meters. The device offers multiple ranges for voltage and resistance, meaning users can select the most suitable setting based on their specific needs. It also comes equipped with a hold function, which is particularly handy when users need to record measurements without straining their eyesight on the display.

One of the standout characteristics of the Radio Shack 63-1036 is its durability. Built to withstand the rigors of everyday use, this multimeter is lightweight yet sturdy, making it an ideal companion for both fieldwork and home use. The device is powered by a standard 9V battery, ensuring that it is always ready for use.

Another notable feature is the safety mechanisms incorporated into the design. The Radio Shack 63-1036 includes fuse protection, guarding against overloading and ensuring user safety. This is particularly essential as it protects the multimeter as well as the user from potential electrical hazards.

In summary, the Radio Shack 63-1036 is a reliable and practical multimeter that caters to a wide range of users, from DIY enthusiasts to professional technicians. Its combination of ease of use, portability, and a rich feature set makes it a go-to tool for those who require precise measurements in their electrical projects. With its proven track record, the 63-1036 continues to be a relevant choice in the ever-evolving landscape of electronic measurement.