Omron Healthcare HEM-705CP instruction manual Loading the Printer Paper

Page 9

LOADING THE PRINTER PAPER

This printer uses OMRON® thermal paper, part number 90TRP. Use only this thermal paper or thermal paper of similar size, width 38mm, roll diameter not to exceed 26mm.

NOTE: For information on where to purchase printer paper visit our website at www.omronhealthcare.com or call customer service at 1-800-634-4350.

1.Open the printer cover in the direction as indicated by the arrow symbols in the illustration.

2.Peel back the glued edge of the printer paper. Cut off the first 4 inches of the paper with a pair of scissors.

3. Insert the edge of the printer paper in paper feeding slot. Press the FEED button until the paper extends approximately 3 inches.

4. Insert the paper through the printer cover. Make sure the paper extends out from the top.

5. Close the printer cover.

9

Image 9

Contents Automatic Blood Pressure Monitor Table of Contents Date Purchased Serial Number IntroductionImportant Safety Notes Before Taking a Measurement Main Unit Know Your UnitBattery Replacement Battery INSTALLATITLEION/REPLACEMENTConnectingtitlethe Printer Loading the Printer Paper Setting the Date and Time Setting Thetitledate and Time Applying the ARM Cuff Applying the ARM Cuff Taking a Measurement Press the ON/OFF buttonPress the Start button Nstructions for Special Conditions Press the ON/OFF button to turn the monitor offTo Delete ALL Values Stored in the Memory Using the Memory FunctionUsing Theiitleprinter To Print the Most Recent Measurement ValuesPr ss the DATA/STOP buttmostn Pr ss the ALL Data button To Print ALL the Measurement Values200 To Print a Graph of ALL Measurement ValuesKeep the monitor in the storage case when not in use Care AndtimaintenancetleError Indicators Printer Unit Problem Causes Solutions Quick Reference Guide Start FCC Statement Omron Shall not be Liable for Loss of USE or ANY Other WarrantyiitleSpeciftitlecations

Related manuals

Manual 28 pages 10.32 Kb