USING THE MEMORY FUNCTION
The monitor is designed to store the blood pressure and the pulse rate in the memory every time a measurement is completed.
The monitor automatically stores up to 60 sets of measurement values (blood pressure and pulse rate). When 60 sets of measurement values are stored, the oldest record is deleted to save the most recent values.
AVERAGING FUNCTION
The monitor calculates the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading.
NOTE: If two sets of measurement values are stored in the memory for the 10 minutes period, the average is based on the two sets of measurement value. If one set of measurement values is stored, this is displayed as the average.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the MEMORY button.
The Average Symbol ( 
) appears on the display when the average reading is shown.
STOP
28