HOW to Apply the ARM Cuff

1.Insert the air plug of the arm cuff into the air jack of the monitor.

2.The cuff should be assembled correctly when it is removed from the box. If it is not, pass the end of the cuff furthest from the tubing through the metal D-ring to form a loop. The smooth cloth should be on the inside of the cuff loop.

3.If the cuff is assembled correctly, the sewn hook material material will be on the outside of the cuff loop and the metal D-ring will not touch your skin.

4.Put your left arm through the cuff loop. The bottom

of the cuff should be approximately 1/2" above the elbow. The cuff tubing should be positioned along the middle of the inside of your arm as shown.

5.Pull the cuff so that the top and bottom edges are tightened evenly around your arm.

Pile Side Material

Sewn Hook Material

D-Ring

Bottom Edge 1/2 Inch

Cuff Tube

Cuff Tab