Error Indicators, Symbol Cause Correction

ERROR INDICATORS

SYMBOL	CAUSE	CORRECTION

	Monitor could not	Take another measurement and
	Monitor could not	remain still until the measurement
	detect pulse wave.	remain still until the measurement
	detect pulse wave.	is complete.
		is complete.
	Cuff under-inflated.
	Cuff not applied	Remove the arm cuff.
	correctly.	Read “Taking a Measurement”.
		Wait 2-3 minutes.
		Wait 2-3 minutes.
	Cuff over-inflated.	Take another measurement.

	Device error.					Contact Customer Service.

	Movement during					Keep still and take another
	Movement during					Keep still and take another
	measurement.					measurement.
	measurement.					measurement.

						Remove the arm cuff. Wait 2-3
						minutes and then take another
	Irregular or weak					measurement. Repeat the steps in
	pulses are detected.					section “Applying the Arm Cuff.”
						If this error continues to appear,
						contact your doctor.

	Batteries are exhausted.					Replace the four batteries.
	Batteries are exhausted.					Refer to “Battery Installation.”
						Refer to “Battery Installation.”