TAKING A MEASUREMENT
USING THE TRUREADTM MODE
1.Select your USER ID (A or B).
2.Press the START/STOP button.
All symbols appear on the display. The USER ID Symbol you selected flashes on the display. The cuff starts to inflate automatically.
NOTE: To stop the inflation or measurement, press the START/STOP button. The monitor will stop inflating, start deflating and will turn off.
3.Inflation stops automatically and the measurement is started. As the cuff deflates, decreasing numbers appear on the display.
The Heartbeat Symbol ( 
) flashes at every heartbeat. When the measurement is complete, the arm cuff completely deflates.
NOTE: Do not move your arm and remain still until the entire measurement process is completed.
4.Check the progress of the consecutive measurements.
NOTE: If a measurement fails, the monitor will repeat taking a measurement up to five times during the consecutive measurement process.
The first measurement is complete, waiting to start the next measurement. The interval of time set between each measurement will appear on the display.
35