Omron Healthcare BP710 instruction manual Using the Memory Function, Press the Memory M button

Page 16

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory. The monitor automatically stores up to 14 sets of measurement values (systolic pressure, diastolic pressure, and pulse rate). When 14 sets of measurement values are stored, the oldest record is deleted to save the most recent values.

1.Press the Memory (M) button.

The most recent set of measurement values appears on the display. The values are displayed from the most recent to the oldest.

NOTE: The number of the reading stored in the memory appears for a second before the pulse rate is displayed. The newest set is numbered “1”.

2.Press the START/STOP button to turn the unit off.

TO DELETE ALL THE VALUES STORED IN MEMORY

You cannot partially delete values stored in the memory. All values will be deleted.

1.Press the Memory (M) button.

Then while holding it down, press the START/STOP button down for more than 2 seconds until the display appears as illustrated below.

2.Press the START/STOP button to turn the unit off.

NOTE: The monitor will automatically turn off after five minutes.

16

Image 16

Contents Automatic Blood Pressure Monitor Table of Contents Introduction Fill in for future referenceSafety Information Could result in death or serious injuryDamage to the equipment or other property Operating the DeviceCare and Maintenance Before Taking a Measurement Know Your Unit Standard Adult Arm CuffUnit Display Irregular Heartbeat Symbol Display SymbolsUsing the Memory Function AHA Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure MmHgCompartment as indicated Replace the battery cover Battery InstallationCover off in the direction of the arrow Applying the ARM Cuff Applying the Cuff on the Left ARMApplying the Cuff on the Right ARM Taking a Measurement Press the START/STOP button to turn the monitor off Special ConditionsUsing the Memory Function Press the Memory M buttonPress the START/STOP button to turn the unit off To Delete ALL the Values Stored in MemoryCare and Maintenance Error Indicators Symbol Cause CorrectionTroubleshooting Tips No power Replace all four batteries with new onesBattery polarities Blood pressure varies constantly. Many factorsFCC Statement Limited Warranties Visit our web site at Call toll freeSpecifications Up to 14 readings Main Unit, Standard Adult Arm Cuff, InstructionManual, and Quick Start Guide Large Cuff 13 17 320 mm 420 mmCopyright 2010 Omron Healthcare, Inc Made in China