3.Using the Unit
3. Press the O/I START button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut itself off after two minutes.
To Delete All Values in Memory
You cannot delete the stored readings partially, all the reading in the unit will be deleted.
To delete stored readings, first press the MEM button. Then while holding it down, press the O/I START button simultaneously for about
Notes:
•After the reading have been deleted, the screen to the right of the illustration above appears and Memory display flashes. Release the buttons to return to the memory display.
•If the date and time are reset to a time before the most recent measurement, the average value will be based on any measurements taken after the date and time were reset. However, you can still view the readings stored in memory.
22