NOTE: If a memory already has data saved in it, a “ ” symbol appears in the lower corner of the LCD. You may use the steps listed above to save over the old data, or press up/down to move to an empty memory location.
To Access and Use Memory Data:
1. Press and hold (SET) button for 3 seconds while the power is off. The scale will enter Memory Recall mode.
2. The last used memory number will appear on the LCD for 1 second.
The data stored in that memory 
number will toggle on the screen. 
(If no data is stored, the default val- 
ues will toggle on the screen.) 
3. Press (UP) / (DOWN) button to scroll to the desired memory number.
4. When your memory number
appears on the LCD, press (SET) to select. A “beep” will sound. Your data
will toggle on the screen.
5. Step on the scale with bare feet. Stand still while the scale measures your weight.
6. Your weight will display for 2 seconds. Continue to stand still on the scale.
7. The scale will start to measure body fat % and body water %. The
LCD will show spinning zeroes 
(“0000”) while the scale computes. 
8. A “beep” sounds
when measurement 
is complete.
Remain on the 
scale. The body fat %, body water % and weight will appear in sequence 6 times each.
9. The scale turns off automatically.
To Clear Memory:
1. Follow steps
2. If the selected memory is occupied (indicated by a “ ” symbol in the lower corner of the LCD), press (SET) button to clear the data in the selected Memory.
To Clear Memory (Cont)
NOTE: If you are having a problem operating this Analyzer please call
General Information about Body Fat and Body Water |
| |||||||
1. Ideal body fat/body water content is not the same for all people. Age, | ||||||||
sex, and heredity are variables in this measurement. Consult your | ||||||||
physician to determine what levels are most ideal for you. |
| |||||||
|
|
|
|
|
|
|
|
|
Male | Low | Normal | High | Female | Low | Normal | High | |
Age |
| Age | ||||||
<7 | 18.1> | <7 | 19.1> | |||||
<8 | 19.1> | <20 | 31.1> | |||||
<9 | 20.1> | <21 | 32.1> | |||||
<11 | 22.1> | <23 | 34.1> | |||||
<13 | 24.1> | <25 | 36.1> | |||||
2.The optimal %TBW of an individual varies according to age and gender. The table as follows may be used as a guide:
Body water healthy range percentages
| female | male |
|
|
|
|
age |
| athlete | female | male | ||
age |
| age |
3.It is recommended to measure body fat, body water or weight at the same time period daily. Please note that body fat contains some body water weight. Thus, body fat and body water percentages will not add up to 100%.
4.Use this product without clothing for best accuracy. Clothes can vary in weight and affect the percentage calculation.
5.Feet must be bare and clean. For best readings they should also be slightly damp.
Level of Hydration
This analyzer measures your weight, the electrical impedance between your feet, and combines those readings with the information you input (Height, Age, Gender, Normal/Athlete). It then automatically calculates your body fat and body water percentages.
Your level of hydration (water content) varies throughout the day and affects your impedance measurement. If you are dehydrated, there is a
Levels of Hydration (Cont)
greater chance for fluctuation in the body fat and body water percentage displayed by this analyzer than when you are fully hydrated.
For best results, choose a consistent time to use this analyzer, such as in the morning. By establishing the pattern of your body’s fluctuation over a period of one month, you can determine your average level of body fat and body water. Women will have more fluctuation in water content than men and need to monitor their reading over a longer time period to establish a personal average. You must determine this as a reference point before measuring progress in a health program.
You must wait several hours before taking a body fat reading when: drinking coffee or alcohol, taking diuretic medications, or exercising. These all affect your level of hydration and the accuracy of this analyzer.
Caution
BIA (Bioelectrical Impedance Analysis) method determines your body fat percentage by sending a harmless signal through the body. Do not use this product if you have a pacemaker or other internal medical device. When in doubt, contact your physician.
This analyzer will give accurate body fat readings for a majority of peo- ple, but is not calibrated for use by the following groups:
Children: Anyone under the age of 18 years
Pregnant Women
Specifications
• Uses BIA (Bioelectrical Impedance Analysis) to determine body fat and total body water percentage
• Uses high precision strain gauge technology to determine weight
• Weight Capacity: 350Lb or 160Kg or 25 St
• Weight Graduation: 0.2Lb or 0.1kg
• Body Fat and Body Water Graduation: 0.1% (in the range from 3% - 50%)
• Height Range: 2’ 8” – 7’ 3” (80 – 220cm)
• Age Range:
• Measures weight, body fat and body water simultaneously in about 10 seconds
•
• Data can be stored for up to 4 individuals
• Athlete or Normal mode selection (not applicable for ages under 18)
• User selectable units of measure (lb), (kg), (st)
• Low battery indicator
•
• Operates on 4 AAA alkaline batteries (not included)
Precautions
1. OVERLOAD WARNING: the maximum weight capacity of this scale is 350 lbs / 160 kgs / 25 st. Remove the weight immediately when
the scale displays “Err2”; otherwise, permanent damage to the scale will occur.
2. The product is intended for home / consumer use only; it is not intended for professional use in hospitals or medical facilities.
3. Do not disassemble the product. Other than replacing the batteries, it contains no user serviceable parts.
4. Clean after use with a lightly dampened cloth. Do not use solvents or immerse the product in water.
5. Your scale contains sensitive electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat it with care to ensure the best performance.
6. Do not store the scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not store the scale on its side.
7. This scale is a sensitive weighing device. To prevent run down of the battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.
Trouble Shooting
1. You must have bare feet to make this measurement. To get the most accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly damp before stepping on the scale.
2. Display Err0 Initialization error. To correct, step off the scale. Press on the platform. The display will show
Repeat measurement.
3. Display Err1 Instability error. Step off and back onto the scale, stand- ing still while your weight computes.
4. Display Err2 Overload Warning. The maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; other- wise, permanent damage to the scale will occur.
5. Display Err3 Body fat percentage is beyond the range. Do not wear shoes or socks during measurement. Cleaning bottom of bare feet with a damp cloth and leaving them slightly damp may help to improve the contact. Repeat measurement.
6. Display Err4 Body water percentage is beyond the range. Cleaning bottom of feet with a damp cloth and leaving them slightly damp may help to improve the contact. Repeat measurement.
7. The condition of the skin on the bottom of your feet can affect the
reading. The natural effects of aging or activity can make this skin hard. Take the reading with clean, slightly damp feet for best accuracy.
NOTE: If you are having a problem operating this Analyzer please call
Lifetime Warranty
This scale is warranted against defects in materials or workmanship for the life of the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commer- cial use, or unauthorized adjustment and/or repair.
Should this scale require service (or replacement at our option) while under warranty, please pack the item carefully and return it prepaid, along with store receipt showing date of purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
USA
There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If service is required, do not return to retailer. For service call 1 (866)
© 2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not for legal trade.
www.taylorusa.com
5594 7.08
5594
Body Fat Analyzer and Scale
Instruction Manual