3.The cuff will quickly inflate to the preset level, Fig. 2, and will get tighter around your wrist. If the cuff becomes too tight, press the POWER button and rewrap the cuff leaving a little more room between the cuff and your wrist. You can stop the measurement/inflation at any time by pressing the POWER button.
4.The heart symbol on the display will flash while the cuff pressure decreases, Fig. 3. Do not be alarmed by the changing numbers or if the numbers appear to be higher than your normal pressure.
Fig. 2
Fig. 3.
5.When the measurement is complete, the cuff will automatically deflate releasing the cuff’s air pressure. Your monitor features “quick exhaust” for added comfort.
6. The display will show your blood pressure (Systolic and Diastolic) measurements and pulse rate, Fig. 4.
7. Your reading will automatically store into
the bank that was selected prior to starting the measurement.
Press the POWER button to turn the unit off. Otherwise the unit will automatically turn off in approximately 30 seconds.
AUTOMATIC REPRESSURIZATION
If the pressure is insufficient during the early phase of meas- urement or if movement is detected, the unit will
Repressurization is not always an indication of a problem and may be repeated.
18