Lumiscope 1130 specifications Blood Pressure Fluctuation, Display Explanation, Installing Battery

Page 4

Blood Pressure Fluctuation

Blood pressure fluctuates all the time! You should not be overly worried if you encounter two or three measurements at high levels. Blood pressure changes over the month and even throughout the day. It is also influenced by season and temperature.

Display Explanation

Display:Icons:

Systolic Pressure

Diastolic Pressure

Pulse Rate

No. of Memory

Sequence

Appears when measurement value is stored in memory or is recalled from memory

Appears when batteries should be replaced

Shows the pulse rate per minute

Occurs when a mistake was made during measurement

Installing Battery

1.Press down and lift the battery cover in the direction of the arrow to open the battery compartment.

2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indication inside the

compartment.

3. Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door.

You need to replace the batteries when: 1. Low battery icon appears on display.

2. The ON/OFF/START button is pushed and nothing appears on display.

Note: Batteries are hazardous waste.

Do not dispose together with the household garbage.

4

Image 4
Contents Blood Pressure Monitor Introduction Parts IdentificationAbout Blood Pressure Blood Pressure StandardBlood Pressure Fluctuation Installing BatteryDisplay Explanation Applying the Arm Cuff Taking a Measurement Recalling MemoryTroubleshooting Helpful TipsSpecifications Two-Year Limited Warranty