SmartInflate Technology

Thank you for purchasing the Lumiscope™ 1095 Comfort Line Blood Pressure Monitor.

A state of the art line of blood pressure monitors that MEASURE ON INFLATION UP TO

TWICE AS FAST as traditional monitors, thus eliminating the pain and discomfort com-

monly felt with traditional styles.

SmartInflate Technology measures the Diastolic (low) pressure first and Systolic (high)

pressure last by adjusting the amount of pressure during the measurement based on

arm size and normal blood pressure fluctuations. Unlike the traditional oscillometric

measurement process that first pressurizes the cuff then slowly releases the air from the

cuff to record a measurement.

SmartInflate Technology eliminates errors caused by users movement during measure-

ment. The Diastolic pressure is taken in a practically natural state, without any arterial

compression and the Systolic pressure is taken with minimal arterial compression,

resulting in more accurate measurements, reduced measurement time and without pain

or discomfort.

Battery Installation/Replacement

• To use the unit, you must install batteries.

• Open battery cover and slide back as illustrated. Install or replace four new batteries, making sure the polarities (+ and -) on the battery match the polarities on the case.

• Replace battery cover.

• Replace the batteries if:

- the Low Battery indicator “ “ appears on the display.

- the ON/OFF/START button is pressed and nothing appears on the display.

•“AAA” alkaline batteries or equivalent are recommended for this blood pressure meter.