2. Preparation
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
2.3Setting the Date and Time
Set the monitor to the correct date and time before taking a measurement for the first time.
1. Press the H Date/Time setting ( 
) button.
The year flashes on the V Date/Time display.
2. Push 
or 
button to change the year.
Push 
button to confirm the year and then the month flashes. Repeat the same steps to change the month, day, hour, and minutes.
Year
Month
Day
Change | Confirm |
|
| Hour | Minute |
: Forward | Change | Confirm |
| ||
|
| ||||
: Back |
|
| Change | Confirm |
|
|
|
|
| Change | Confirm |
Change Confirm
3. Press the START/STOP button to turn the monitor off.
Notes:
EN
• If the batteries have been replaced, the date and time setting will need to be reset. | 9 |
• If the date and time are not set, |