3. Using the Unit
The user alternates with each press of the user ID selection button, as shown below.
User A | User B | Guest | ||
|
|
|
|
|
|
|
|
|
|
Note:
•If “G” is selected, the measurement results are not stored in the memory.
•If the START/STOP button is pressed without selecting a user ID, “G” is displayed and the measurement results are not stored in the memory.
4.Check that you are sitting correctly.
If you are not sitting correctly, the 
symbol appears on the display. The 
symbol disappears when you are in the correct posture.
Start measurement only after checking that you are sitting correctly.
Note: Depending on the angle of the arm cuff, the 
symbol will appear on the display even if your arm is not in the arm cuff.
Not lit
Angle of arm cuff when sitting correctly.
24