3.Using the Unit
3.4Using the Memory Function
The unit automatically stores up to 14 sets of measurement values (blood pressure and pulse rate). When 14 sets of measurement values are stored, the oldest record is deleted to save the most recent values.
1. Press the I/O button to turn the power on.
2. When the heartbeat symbol appears on the display, press the M button.
The result from the most recent measurement is displayed.
Note: If there are no measurements results stored in memory, the screen to the right is displayed.
Important: If your systolic or diastolic pressure is outside the standard range, the heartbeat symbol will blink when the measurement result is displayed. Refer to 3.3, number 7.
20