TOPCOM BPM ARM 1480
10 Measurement
10.1 Important
1.This monitor automatically switches off 1 minute after the last key operation.
2.To interrupt the measurement, simply press any key. The cuff will deflate immediately after a key is pressed.
3.During the measurement, do not talk or move your arm or hand muscles.
ENGLISH
10.2 Procedure
ERROR
1.Press the START/STOP button to start measurement. All segments will appear on the display. The cuff will inflate to the level that is right for you.
2.When the right level is reached, the cuff will deflate.
3.When the measurement is completed, systolic, diastolic and pulse will be shown simultaneously on the LCD screen. The result will be saved automatically in the memory system. Up to 48 results can be saved. If the memory is full, the oldest data will be erased automatically.
When a mistake was detected during measurement the Error mark appears on the display
9