Troubleshooting
Problem |
|
|
| Probable cause | Corrective action | |||
|
|
|
|
|
|
| ||
Nothing appears in | Batteries are drained. | Replace all batteries with new ones. | ||||||
the display, even |
|
|
|
|
|
|
| |
Battery terminals are not in the correct | Place the batteries with negative and positive terminals | |||||||
when the power is | ||||||||
position. Batteries are not installed | matching those indicated in the holder. | |||||||
turned on. | ||||||||
properly. |
| |||||||
|
| |||||||
|
|
|
|
|
|
| ||
The cuff will not | Battery voltage is too low. | Replace all batteries with new ones. | ||||||
inflate. | ( | , LOW BATTERY mark |
| |||||
| appears). If the batteries are drained, |
| ||||||
| the mark does not appear. |
| ||||||
|
|
|
|
|
|
| ||
The device will not | The cuff is not fastened properly. | Fasten the cuff correctly. | ||||||
measure. Readings |
|
|
|
|
|
| ||
You moved your arm or body during | Make sure you remain very still and quiet during the | |||||||
are too high or too | the measurement. | measurement. | ||||||
low. | ||||||||
|
|
|
|
|
|
| ||
The cuff position is not correct. | Adjust the cuff position. | |||||||
| ||||||||
|
|
|
|
|
|
| Raise your hand so that the cuff is at the same level as | |
|
|
|
|
|
|
| your heart. | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| If you have a very weak or irregular heat beat, the device | |
|
|
|
|
|
|
| may have difficulty in determining your blood pressure. | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
Other | The value is different from that | See “3. Why measure blood pressure at home” on page | ||||||
| measured at a clinic or doctor’s office. | 10. | ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Remove the batteries. Place them back in correctly, and | |
|
|
|
|
|
|
| try the measurement again. | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
Note:
If the actions described above do not solve the problem, contact the dealer. Do not attempt to repair the device yourself.
ENGLISH 12