Panasonic CS-E7GKR, CU-E9GKR Product Overview & Operations, Indicator, To Turn on or OFF the Unit

4

PRODUCT OVERVIEW & OPERATIONS

e-ion AIR PURIFYING SYSTEM	Auto OFF/ON button
	• Used when remote control is misplaced
Do not touch during operation	or malfunction.

e-ion filters	Active e-ion Power	Active e-ion Generator	Action	Mode
			Press once.	Auto
	Module
			Press and hold until 1 beep
				Cooling
			is heard, then release.
Front panel
			Press and hold until 1 beep
			is heard, then release.	Heating
			Press again until 2 beeps,
			then release.
			Press the button to turn off.
			INDICATOR

Horizontal airflow direction louver

•Manually

adjustable. Vertical airflow direction louver

• Do not adjust	Receiver
by hand.

Remote control	TO TURN ON OR OFF THE UNIT
display	• Please be aware of the OFF indication on the remote control
	display to prevent the unit from starting / stopping improperly.
	TO SET TEMPERATURE

• Selection range: 16˚C ~ 30˚C.

• Operating the unit within the recommended temperature could induce energy saving.

HEAT mode : 20˚C ~ 24˚C.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

• Unit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature. During operation mode selection the power indicator blinks.

HEAT mode - To enjoy warm air

• Unit takes a while to warm up. The power indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

• Unit operates at low fan speed to give a gentle cooling operation.