TAKING YOUR BLOOD PRESSURE
The
Normal Measurement with Readings Stored in Memory
Press the START 1 or START 2 button. Your blood pressure is measured and the reading is stored into memory. Each START button can store up to 30 readings in memory.
Recalling Previous Measurements
To recall previous measurements in memory, press and hold the START 1 or START 2 button. Release the button after you see the first reading recalled from memory. The previous measurements are displayed from most recent to oldest.
Clearing Memory
Remove batteries to clear memory. Insert batteries again to resume blood pressure measurements.
Taking a Measurement without Reading Stored in Memory (Guest Mode)
This mode can be used when there is a third person taking measurements or storing readings in memory is not desired. Press both the START 1 and START 2 buttons at the same time. A reading will be taken, but not stored into memory.
Tips for Blood Pressure Monitoring:
☞Relax for about 5 to 10 minutes before measurement.
☞Remove constricting clothing and place cuff on bare arm.
☞Unless your physician recommends otherwise, use left arm to measure pressure.
LifeSource Health Line |