Panasonic CU-E28FKR, CU-E24FKR, CS-E24FKR, CS-E28FKR operating instructions Timer

■Operation Details

•The timer allows you to turn the air conditioner on or off automatically.

•The unit may start in preliminary operation before the actual set time when ON timer has been set.

•The set timer repeats daily once set.

•If there is a power failure, you can restore the previous setting (once power is resumed) by pressing the SET button.

•If the timer is cancelled, press SET to restore the previous setting.

■Hints

•Press and hold the CLOCK for approximately 5 seconds to set either 12-hour (am/pm) or 24-hour time indication.

•To dim the indicator display:

				Press and hold for
TIMER				5 seconds.
ON			SET	To cancel, press
1	2		3	the	again for
OFF			CANCEL 5 seconds.
		AC RC
SETT CHECK CLOCK			RESET

•To switch the temperature setting to °C or °F, press and hold for approximately 10 seconds.

TIMER

1

Select ON or

OFF timer.

CANCEL

Cancel the selected timer.

AUTO		FAN	2
HEAT		SPEED
COOL
DRY		AIR		2
		SWING
MODE OFF/ON			Set the
			desired time.
QUIET
POWERFUL TEMP FAN SPEED			3
TIMER	AIR SWINGG
			Confirm the
ON		SET
1	2	3	setting.
OFF		CANCEL
	AC RC
SET CHECK CLOCK		RESET

●The timer is valid only when the clock is set correctly.

●You can set your preferred time for ON and OFF timers. The unit will turn ON or OFF automatically.

●To cancel ON or OFF timer, press /. or OFF , then

press .

#!.#%,

Troubleshooting

●Timer indicator always on.

●Remote control does not work.

●The unit does not work.

●Power indicator blinks before the unit is switched on.

►The timer setting repeats daily once set.

►The batteries are inserted incorrectly or need replacing.

►The circuit breaker is tripped or the timer is set incorrectly.

►This is a preliminary step in preparation for the operation when the ON timer has been set.

8