HOW TO WRAP THE WRIST CUFF
English | Wrap the wrist cuff around your wrist properly. Improper wrapping of | |
the cuff may result in measuring errors. | ||
| ||
| 1 Open the wrist cuff. | |
Español | 2 Wrap the cuff around your left wrist | |
so that the monitor is positioned on | ||
| the inside of your wrist. | |
| • Wrap the wrist cuff on bare skin. | |
Português | • The wrist cuff is designed to fit | |
wrists from 13.5 to 21.5 cm in | ||
circumference. | ||
| ||
| 3 Loosely fit the wrist cuff by | |
| pulling the end of the cuff. | |
Italiano |
| |
Français |
| |
中文 |
|
HOW TO WRAP THE WRIST CUFF
4 Position the top edge of the cuff approximately 1 to 2 cm away from the crease of your wrist.
5 Secure the wrist cuff with the
• If the wrist cuff is wrapped too loose or tight, errors or incorrect readings may result.
You may use your right wrist to measure your blood pressure.
However, your blood pressure may differ by about 10mmHg depending on whether measured on your left or your right wrist, so ideally you should measure your blood pressure on the same wrist each time.
To obtain accurate measurements
•Wrapping the cuff too loosely or too tightly may prevent correct measurement.
•Sit up straight while taking the measurement.
中文 Français Italiano Deutsch Português Español English
- Eng 14 - | - Eng 15 - |